View Single Post
Old 01-01-2012, 05:47 AM   #78
pwpanas
Supra Owner
 
pwpanas's Avatar
 
Join Date: Oct 2005
Location: GA, USA
Posts: 2,209
pwpanas is on a distinguished road
Default

Quote:
Originally Posted by warmkop View Post
The EN 24 mild steel is the hardest mild steel you can get but when it wears out i wil most likely go for a tilton clutch next.
What if you machined a recess, and made a replaceable section (roughly a flattened doughnut shape) to deal with wear and heat spots? Best design would have the doughnut cut in three or four sections to deal with heat expansion, and of course recess the mounting screws.
__________________
Phil '94 Supra Turbo, 6spd, 'APU'+
Displacement is no replacement for boost.
Life begins at 30psi.


NB: Please consider posting any help requests in a new thread instead of asking me for help privately. About 99.9+% of the time, private help requests end up covering great information that could be very valuable to other forum members. If you have a good reason for needing the help request to be private, I'll consider it. If not, then why not give everyone else the opportunity to pitch in too, and/or learn from the information? Remember, there's no such thing as a dumb question. We're all here to help within this family of Supra owners.

Last edited by pwpanas; 01-01-2012 at 12:40 PM.
pwpanas is offline   Reply With Quote