View Single Post
Old 02-22-2013, 07:01 PM   #160
pwpanas
Supra Owner
 
pwpanas's Avatar
 
Join Date: Oct 2005
Location: GA, USA
Posts: 2,209
pwpanas is on a distinguished road
Default

Quote:
Originally Posted by warmkop View Post
I have 1 or 2 problems on the car that must be fiks it drives fine at 0.9bar but at 1.5bar it feels like the wasgate is opening and closing going to look at that next.
I also had her at the 1/4mile boosting 0.9 why to much wheelspin had 225 semis on the back just to test her.
Please remind me - what kind of boost controller are you using? Also, what is the boost specification of the spring that's in your wastegate?

What's a "semis"? Is that the same as a "Drag Radial"? Also, why only 225 width (that seems pretty darn narrow).

315-width drag radials on 11.5" width rims are very popular here in the US for the strip. Also (of course MT drag slicks).
http://www.bfgoodrichtires.com/tire-...techspec_table
http://www.mickeythompsontires.com/s...hp?item=ETDrag
__________________
Phil '94 Supra Turbo, 6spd, 'APU'+
Displacement is no replacement for boost.
Life begins at 30psi.


NB: Please consider posting any help requests in a new thread instead of asking me for help privately. About 99.9+% of the time, private help requests end up covering great information that could be very valuable to other forum members. If you have a good reason for needing the help request to be private, I'll consider it. If not, then why not give everyone else the opportunity to pitch in too, and/or learn from the information? Remember, there's no such thing as a dumb question. We're all here to help within this family of Supra owners.

Last edited by pwpanas; 02-22-2013 at 07:05 PM.
pwpanas is offline   Reply With Quote