04-15-2015, 03:28 PM
|
#2
|
|
Supra Owner
Join Date: Oct 2005
Location: GA, USA
Posts: 2,209
|
Quote:
Originally Posted by Dozernl
I just received my new Chase Bays harness for my 96 mk4. It has the mil spec and Haltech connectors. Looking at the oem harness there are several plugs inside the cabin that are not on the new harness. Do I have to split the old harness and use these plugs? There are also 2 plugs on the new harness that go into the cabin that I have no idea where they go. I thought this would be a straight forward install. Wrong! Anybody who has installed this harness your help would be greatly appreciated. Thanks.
|
Doesn't Chase Bays provide instructions?
__________________
Phil '94 Supra Turbo, 6spd, 'APU'+
Displacement is no replacement for boost.
Life begins at 30psi.
NB: Please consider posting any help requests in a new thread instead of asking me for help privately. About 99.9+% of the time, private help requests end up covering great information that could be very valuable to other forum members. If you have a good reason for needing the help request to be private, I'll consider it. If not, then why not give everyone else the opportunity to pitch in too, and/or learn from the information? Remember, there's no such thing as a dumb question. We're all here to help within this family of Supra owners.
|
|
|