Clutch problems

Bru · 09-08-2018, 06:28 PM

Make sure that the clutch pedal free play is not over adjusted. That pin that fits in the back of master cylinder should wiggle just a little and not be tight up against it. There's a lock nut and you also need to hold the other slot With the 2nd wrench to Loosen and tighten it. The procedure is detailed in a good repair manual either Toyota or Haynes. If there any air in the system it will expand with heat and cause the clutch to act automatically and make it slip.

09-08-2018, 06:28 PM	#2
Bru Bone Stock w Upgrades ;-) Join Date: Apr 2010 Location: Tampa Bay Posts: 210	Make sure that the clutch pedal free play is not over adjusted. That pin that fits in the back of master cylinder should wiggle just a little and not be tight up against it. There's a lock nut and you also need to hold the other slot With the 2nd wrench to Loosen and tighten it. The procedure is detailed in a good repair manual either Toyota or Haynes. If there any air in the system it will expand with heat and cause the clutch to act automatically and make it slip. Last edited by Bru; 09-14-2018 at 12:55 AM.