TIMING!!!

suprra_girl · 02-06-2005, 10:31 PM

the cams should be aligned with the marks on the backing plate behind the cam pulleys... you should see two lines and a dot on the cam pulley... align the dot with the small line

i would suggest getting someone to do your belt for you that has experience... if you get the belt out too far you can hit valves

i'm not sure if 5m's have diagnostics ports

Good luck with it

02-06-2005, 10:31 PM	#2
suprra_girl 7M POWAH! ;) Join Date: Jun 2004 Location: New Zealand Posts: 2,312	the cams should be aligned with the marks on the backing plate behind the cam pulleys... you should see two lines and a dot on the cam pulley... align the dot with the small line i would suggest getting someone to do your belt for you that has experience... if you get the belt out too far you can hit valves i'm not sure if 5m's have diagnostics ports Good luck with it __________________ Please use the forum to ask your questions as they will get replied to much faster than pming me Pics of my build. "Good girls are just bad girls that don't get caught" Do a diagnostic first!