View Single Post
Old 02-24-2006, 05:39 AM   #2
pwpanas
Supra Owner
 
pwpanas's Avatar
 
Join Date: Oct 2005
Location: GA, USA
Posts: 2,209
pwpanas is on a distinguished road
Default

Quote:
Originally Posted by SupraTT/Iceland
...New Toyota Supra Head...
What was wrong with your current head?

Quote:
Originally Posted by SupraTT/Iceland
...HKS Fuel Cut Defenser...
If you're going to continue using the oem twins in sequential mode, you need to get rid of this HKS FCD and purchase a GReddy BCC.

Oh, and why didn't you order the shortblock and head from your local Toyota dealer?

Have you purchased a new gasket set from Toyota yet?

...and you don't need to run head studs (vs oem head bolts) unless you're planning to run a huge turbo & upgraded fuel system in the near future.
__________________
Phil '94 Supra Turbo, 6spd, 'APU'+
Displacement is no replacement for boost.
Life begins at 30psi.


NB: Please consider posting any help requests in a new thread instead of asking me for help privately. About 99.9+% of the time, private help requests end up covering great information that could be very valuable to other forum members. If you have a good reason for needing the help request to be private, I'll consider it. If not, then why not give everyone else the opportunity to pitch in too, and/or learn from the information? Remember, there's no such thing as a dumb question. We're all here to help within this family of Supra owners.

Last edited by pwpanas; 02-24-2006 at 05:48 AM.
pwpanas is offline   Reply With Quote