timing problems

suprra_girl · 03-13-2006, 11:16 AM

set crank to 0
make sure cams are aligned with notches in the plate behind
pull out cps
reset cps to timing marks
put back in
warm up car
turn off
short te1 and e1 terminals in diagnostic box
get timing light
connect it up (make sure it won't get tangled in fan etc)
turn on car
turn cps till timing hits 10 on the crank

done

if in doubt
http://www.cygnusx1.net/supra/librar.../em/EM_29.html
http://www.cygnusx1.net/supra/librar.../ig/IG_24.html

03-13-2006, 11:16 AM	#3
suprra_girl 7M POWAH! ;) Join Date: Jun 2004 Location: New Zealand Posts: 2,312	set crank to 0 make sure cams are aligned with notches in the plate behind pull out cps reset cps to timing marks put back in warm up car turn off short te1 and e1 terminals in diagnostic box get timing light connect it up (make sure it won't get tangled in fan etc) turn on car turn cps till timing hits 10 on the crank done if in doubt http://www.cygnusx1.net/supra/librar.../em/EM_29.html http://www.cygnusx1.net/supra/librar.../ig/IG_24.html __________________ Please use the forum to ask your questions as they will get replied to much faster than pming me Pics of my build. "Good girls are just bad girls that don't get caught" Do a diagnostic first!