Supra is dead....

supradaddy0803 · 07-07-2006, 05:37 PM

I have run into this before with the 86.5 I had costs alot to rebuild cost me 1300 dollars to get all the stuff I needed including crank. Fun part about the crank you have to get it from toyota it costs like 800 bucks and you get no core charge ouch. This is only if you have damaged the crank with the spun bearing which is no telling till you pull it apart and the haynes manual doesnt give you the correct torque settings for all the motors I got a toyota shop manual to get the job done works much better. Alright about the persuits of yours here the things I would go for rebuild like I said is gonna cost you and you can get a jdm 7mgte for like 800 bucks no tranny and no ecu but depends on where you look ebays a good choice but never know what you will get. The 350 looks crappy and chevy motors from experience like to eat cams and lifters and push rods for that matter kinda par for the course. So I guess what I am suggesting is a JDM swap you get a 40000 motor in good shape and fits the car with little to no mods to the body.

07-07-2006, 05:37 PM	#2
supradaddy0803 12psi boost Join Date: May 2006 Location: Athens, TX Posts: 308	tough break I have run into this before with the 86.5 I had costs alot to rebuild cost me 1300 dollars to get all the stuff I needed including crank. Fun part about the crank you have to get it from toyota it costs like 800 bucks and you get no core charge ouch. This is only if you have damaged the crank with the spun bearing which is no telling till you pull it apart and the haynes manual doesnt give you the correct torque settings for all the motors I got a toyota shop manual to get the job done works much better. Alright about the persuits of yours here the things I would go for rebuild like I said is gonna cost you and you can get a jdm 7mgte for like 800 bucks no tranny and no ecu but depends on where you look ebays a good choice but never know what you will get. The 350 looks crappy and chevy motors from experience like to eat cams and lifters and push rods for that matter kinda par for the course. So I guess what I am suggesting is a JDM swap you get a 40000 motor in good shape and fits the car with little to no mods to the body.