can cam position sensor cause

IHateHacks · 03-22-2007, 01:15 AM

I just took it for granted that your timing was set properly.

I highly recommend you set base ignition timing. You need a timing light and must jumper terminals T and E1 with the engine at full operating temp. Base ignition timing should be set to 10 degrees BTDC.

03-22-2007, 01:15 AM	#4
IHateHacks 20psi boost Join Date: May 2006 Location: New Haven/Hamden Posts: 793	I just took it for granted that your timing was set properly. I highly recommend you set base ignition timing. You need a timing light and must jumper terminals T and E1 with the engine at full operating temp. Base ignition timing should be set to 10 degrees BTDC.