how about those speed parts?

JunkerMK3gte · 04-11-2007, 03:31 AM

you guys are actin like im a newbe or somethin. i build race cars professionaly. have been for years. like i said before.. IM NOT SELLING ANYTHING TO YOU RIGHT NOW!!!!!! all im trying to do is see if theres enough DEMAND for these type of parts for myself and our company to manufacture these parts/ kits. if you interested, then tell me. dont sit here and tell me about your hard earned green.
For those of you that are curious..... we manufacture hard core race/ street parts and kits... i.e. superchargers, turbos, gears (differential and tranny), along with full chassis, back-halves and suspension. just to name some. if any one knows who Rossler transmision is, those gears are ours. we do r/d for powerdyne, tubonetics, greddy, and many others. our website is www.theracecarfactory.com.
the parts im talking about for our beautiful MA70's include full bolt in chro-moly subframe replacements for the factory stamped steel peices. the control arms that come with these are also crho-moly with full hiem-joint ends. 100% stonger and stiffer. which can also be purchased seperatly from the subframes.( both front and rear are covered.) full kit is about $2800. the control arms (seperate)are $300 per set(front or rear)
next would be carbon fiber parts. full doors-$800 each, hoods 850, hatches900, door skins 350, and targas for about 1200(stucture=$)
turbo manifolds. benifits of cast iron- fast spool because it holds heat. benifits of stainless- because it hols heat AND its non-corrosive.. combine the two with a cast- stainless manifold- $650-900...depending on flange type. sheet metal aluminum intakes for about 600. 80 mm throttle boddies with no emission b/s for 750-800. cold airs for about 150 bucks(under the fender)
and how about a vader styled body kit. normal pricing but not like anything before.. think acura integra vader kit meets supra.
and finally how many of you tried to find a big brake kit and turned up anything?. exactly. im takin like 12" fronts.6 piston or even 4. now the brakes i havent made to perfection(retail worthy) so youll have to wait for a possible price.
NOW THE QUESTION IS..... IF YOU COULD BUY THEM NOW.. HOW MANY OF YOU WOULD BE INTERESTED? REMEMBER. I AM NOT TRYING TO SELL ANYTHING TO YOU RIGHT NOW. IM ONLY TRYING TO DETERMINE IF ITS WORTH WHILE FOR ME TO PRODUCE THIS STUFF. ...AND ITS NOT LOOKIN GOOD FOR YOU GUYS(SORRY) BECUASE IVE HAD LIMITED INQUIRIES ABOUT IT. EITHER ONE PEOPLE ARE ONLY TRYING TO LOOK FAST.OR THEIR WORRIED IM GONNA RIP THEM OFF. IM ONLY TRYING TO GET ENOUGH PEOPLE THAT WANT THEM .
ARE WE CLEAR ABOUT THIS? I DONT WANT ANY MISUNDERSTANDINGS. I AM NOT SELLING ANYTHING TO ANYBODY ON THIS SITE!!!!!

04-11-2007, 03:31 AM	#5
JunkerMK3gte Stock Join Date: Mar 2007 Location: Akron, Ohio Posts: 22	now hold on a minute you guys are actin like im a newbe or somethin. i build race cars professionaly. have been for years. like i said before.. IM NOT SELLING ANYTHING TO YOU RIGHT NOW!!!!!! all im trying to do is see if theres enough DEMAND for these type of parts for myself and our company to manufacture these parts/ kits. if you interested, then tell me. dont sit here and tell me about your hard earned green. For those of you that are curious..... we manufacture hard core race/ street parts and kits... i.e. superchargers, turbos, gears (differential and tranny), along with full chassis, back-halves and suspension. just to name some. if any one knows who Rossler transmision is, those gears are ours. we do r/d for powerdyne, tubonetics, greddy, and many others. our website is www.theracecarfactory.com. the parts im talking about for our beautiful MA70's include full bolt in chro-moly subframe replacements for the factory stamped steel peices. the control arms that come with these are also crho-moly with full hiem-joint ends. 100% stonger and stiffer. which can also be purchased seperatly from the subframes.( both front and rear are covered.) full kit is about $2800. the control arms (seperate)are $300 per set(front or rear) next would be carbon fiber parts. full doors-$800 each, hoods 850, hatches900, door skins 350, and targas for about 1200(stucture=$) turbo manifolds. benifits of cast iron- fast spool because it holds heat. benifits of stainless- because it hols heat AND its non-corrosive.. combine the two with a cast- stainless manifold- $650-900...depending on flange type. sheet metal aluminum intakes for about 600. 80 mm throttle boddies with no emission b/s for 750-800. cold airs for about 150 bucks(under the fender) and how about a vader styled body kit. normal pricing but not like anything before.. think acura integra vader kit meets supra. and finally how many of you tried to find a big brake kit and turned up anything?. exactly. im takin like 12" fronts.6 piston or even 4. now the brakes i havent made to perfection(retail worthy) so youll have to wait for a possible price. NOW THE QUESTION IS..... IF YOU COULD BUY THEM NOW.. HOW MANY OF YOU WOULD BE INTERESTED? REMEMBER. I AM NOT TRYING TO SELL ANYTHING TO YOU RIGHT NOW. IM ONLY TRYING TO DETERMINE IF ITS WORTH WHILE FOR ME TO PRODUCE THIS STUFF. ...AND ITS NOT LOOKIN GOOD FOR YOU GUYS(SORRY) BECUASE IVE HAD LIMITED INQUIRIES ABOUT IT. EITHER ONE PEOPLE ARE ONLY TRYING TO LOOK FAST.OR THEIR WORRIED IM GONNA RIP THEM OFF. IM ONLY TRYING TO GET ENOUGH PEOPLE THAT WANT THEM . ARE WE CLEAR ABOUT THIS? I DONT WANT ANY MISUNDERSTANDINGS. I AM NOT SELLING ANYTHING TO ANYBODY ON THIS SITE!!!!!