clutch pedal to the floor

mrnickleye · 05-01-2007, 02:39 PM

OH....

If it were mine.....

I would attempt to bleed it out first.

If that failed to repair it, I would try to SEE into the pressure plate, throw out bearing area to determine if the arm and such all looked normal.

If so, then I would likely replace the master cyl. with a reman unit from Carquest. Cost between $65-$130.

Rebuild kits are $22-$42. If you KNOW how.

Slaves cost $18-$64. Kits $10-$18

05-01-2007, 02:39 PM	#7
mrnickleye 1000whp postwhore Join Date: Jun 2005 Location: Mojave Desert, Calif. Posts: 1,705	OH.... If it were mine..... I would attempt to bleed it out first. If that failed to repair it, I would try to SEE into the pressure plate, throw out bearing area to determine if the arm and such all looked normal. If so, then I would likely replace the master cyl. with a reman unit from Carquest. Cost between $65-$130. Rebuild kits are $22-$42. If you KNOW how. Slaves cost $18-$64. Kits $10-$18 __________________ Had a Red 1989 N/A. Automatic. Sports Pkg. w/wing. TEMS, and some nice MODS. Sold to a friend 10/08/08.