engine wont redline?

supradaddy0803 · 06-22-2007, 07:11 PM

Lastly to check codes on your ECU take a jumper wire and on the check engine port under the hood bridge the T and E1 ports in it and then get in the car and turn the key on but dont start it. Count the check engine light flashes it will do a series then a space then another series. like a 2 then a 1 for code 21. if there are any on there post them on here and I will tell you what to look at.

06-22-2007, 07:11 PM	#6
supradaddy0803 12psi boost Join Date: May 2006 Location: Athens, TX Posts: 308	Lastly to check codes on your ECU take a jumper wire and on the check engine port under the hood bridge the T and E1 ports in it and then get in the car and turn the key on but dont start it. Count the check engine light flashes it will do a series then a space then another series. like a 2 then a 1 for code 21. if there are any on there post them on here and I will tell you what to look at. __________________ 1987 supra NA 5 speed 1JZGTE swap Tokico Illumina 2 and Eibach springs Tokico pillow blocks Suspension Techniques front and rear sway bar HKS super dragger cat-back exhaust plus test pipe Greddy Profec B spec 2 boost controller HKS type 1 turbo timer Supra sport solid steel drive shaft Walboro 255 fuel pump JZA70 Front end mod 18" Volk Racing AV3 18x8.5 front 18x9.5 rear