Head Gasket

IHateHacks · 06-27-2007, 01:03 AM

Proper prep work done to the head and block, ARP hardware (bolts or studs), a digital torque wrench, and following the tighening sequence that's in the TSRM will keep it from blowing again. I did mine in 5 passes, the TSRM recommends 3.

06-27-2007, 01:03 AM	#3
IHateHacks 20psi boost Join Date: May 2006 Location: New Haven/Hamden Posts: 793	Proper prep work done to the head and block, ARP hardware (bolts or studs), a digital torque wrench, and following the tighening sequence that's in the TSRM will keep it from blowing again. I did mine in 5 passes, the TSRM recommends 3.