From Supra Non turbo to 1jzgtte

supradaddy0803 · 09-06-2007, 12:07 AM

Engine mount adapters or new crossmember from a 89+, ignitor, intercooler, intercooler piping, intake pipe, power steering line, possibly new tach, all wireling that needs to be changed under your dash, the EA2 plug for under the hood. Also you will need downpipe, solid R154 driveshaft, antiscream cream( its a tight fit little KY would be nice. The clip is better for the swap specially if you have a pre 89 because of some differences. Also you get all the plugs and a template too look at for the swap.

09-06-2007, 12:07 AM	#2
supradaddy0803 12psi boost Join Date: May 2006 Location: Athens, TX Posts: 308	Engine mount adapters or new crossmember from a 89+, ignitor, intercooler, intercooler piping, intake pipe, power steering line, possibly new tach, all wireling that needs to be changed under your dash, the EA2 plug for under the hood. Also you will need downpipe, solid R154 driveshaft, antiscream cream( its a tight fit little KY would be nice. The clip is better for the swap specially if you have a pre 89 because of some differences. Also you get all the plugs and a template too look at for the swap. __________________ 1987 supra NA 5 speed 1JZGTE swap Tokico Illumina 2 and Eibach springs Tokico pillow blocks Suspension Techniques front and rear sway bar HKS super dragger cat-back exhaust plus test pipe Greddy Profec B spec 2 boost controller HKS type 1 turbo timer Supra sport solid steel drive shaft Walboro 255 fuel pump JZA70 Front end mod 18" Volk Racing AV3 18x8.5 front 18x9.5 rear