05-20-2008, 07:42 PM
|
#29
|
AEM EMS
Join Date: Jul 2006
Location: UK
Posts: 891
|
Mine where very similar to these Sealy, You need to be very careful when fitting the new seals, I managed to split two of mine. If the head needs to be skimmed by a machine shop I would ask them for a price for re cutting the valves seats, inserting new seals and reset the valve lifter shims, they will also do a pressure test. You may find by the time you’ve bought all the tools; dial gauge micrometers, and the rest you could be halfway towards paying the machine shop to do it.
|
|
|