Found this over on Supramania complements of Reign_Maker
Fitting sizes...
Oil feed from block: M12 X 1.25 (-4AN)
Water feed from neck: 9919DFG (Earl's) Top of water neck is 1/4 NPT (may have to tap it)
Water return to neck: M14 X 1.5 (-6AN)
Turbo inlet/outlet water: 981666 (Earl's?)
Fuel rail inlet: M14 X 1.5 (-8AN or -6AN)
Fuel rail return: M12 X 1.25 (-6AN)
|