Quote:
Originally Posted by CyFi6
There is no bleeder port on our cooling system
The radiator cap should be rated between 9-15 psi
If your hose clamps are loosening themselves up, your hose clamps are the problem not your hose. Dont use hose clamps anyways. Go get yourself a new radiator upper hose and buy some spring constant tension type clamps. Hose clamps totally fuck up hoses over the long run.
|
The hose clamps aren't loosing up the hose is sliding off slowly when the the engines hot. At first i was using the stock clamps then i switched to new ones either way the hose is still sliding off.