Thread: 2JZ-GTE Crank Pulley Removal
View Single Post
Old 10-26-2008, 05:59 AM   #4
pwpanas
Supra Owner
 
pwpanas's Avatar
 
Join Date: Oct 2005
Location: GA, USA
Posts: 2,209
pwpanas is on a distinguished road
Default
Quote:
Originally Posted by theboy641 View Post
thanks mate, i did manage to undo it and change the pulleys yesterday using an air gun whilst getting someone to hit the bolt with a hammer and chisel. thanks again.
Yet another method! Interesting...

Btw, not too sure about how generally recommendable the hammer and chisel part of this method is - worst case, the crank bearings could be affected. *shrug*
__________________
Phil '94 Supra Turbo, 6spd, 'APU'+
Displacement is no replacement for boost.
Life begins at 30psi.

NB: Please consider posting any help requests in a new thread instead of asking me for help privately. About 99.9+% of the time, private help requests end up covering great information that could be very valuable to other forum members. If you have a good reason for needing the help request to be private, I'll consider it. If not, then why not give everyone else the opportunity to pitch in too, and/or learn from the information? Remember, there's no such thing as a dumb question. We're all here to help within this family of Supra owners.
Last edited by pwpanas; 10-26-2008 at 10:48 PM.
pwpanas is offline   Reply With Quote