Timing question

Bill UK · 07-10-2009, 07:52 PM

Good write up HERE don’t forget this for a 7M-GTE, you can either use # 1 or # 6 HT leads for the timing light connection, as the coil pack fires pairs of HT leads. 7M-GE use # 1 HT lead only. The notch on the pulley is as in the diagram posted.

07-10-2009, 07:52 PM	#4
Bill UK AEM EMS Join Date: Jul 2006 Location: UK Posts: 891	Good write up HERE don’t forget this for a 7M-GTE, you can either use # 1 or # 6 HT leads for the timing light connection, as the coil pack fires pairs of HT leads. 7M-GE use # 1 HT lead only. The notch on the pulley is as in the diagram posted.