Thread: n/a advice
View Single Post
Old 07-25-2009, 06:19 AM   #1
dj7mge
Stock
 
Join Date: Mar 2008
Location: milwaukee,WI
Posts: 18
dj7mge is on a distinguished road
Default n/a advice

ok i know this has been beaten to death but i want to make more power out of my 7mGE. i know i could build the head and raise compression or do a turbo swap none of wich i have the money for atm. id just like to get around a 15flat possibly high 14. my car currently runs a 15.6 with an intake pacesetter exhaust no cat fd rx7 wheels with cooper zeon?tires and a fidanza flywheel.

i will be installing a pacesetter header and stright piping all the way to the testpipe and some suspension/break pices as i will be doing some light autox and road course racing. i have those pices picked out already. i also am removing un needed stuff such as tems cruise a/c and egr.

i have done some research but i have some questions.

first off upgrading the throttle body. what tb's can i use from other cars or aftermarket and how would i fit the vaccum lines.

second i know these cars are very heavy and i will be lightening it up somewhat but not completely gutting it because the car is very clean and is my dd, i know the seats weigh alot espically the drivers seat. my question is what seats could i swap in that would be lighter without spending big $ on racing seats.


thats all i can think of atm any and all advice will be greatly appreciated.
__________________
86.5 n/a
custom cai,2.5" catless exhaust ,centerforce "stage1"clutch, fidanza flywheel
dj7mge is offline   Reply With Quote