Vacuum line layout for 1989 JDM turbo?

MA70-3.0GT · 11-12-2009, 05:06 PM

As per the title really, I've been going off USDM photos & diagrams for the vacuum pipe routing on my '89my JDM Supra with 7m-gte lump & while I think it's pretty much there I'd really appreciate if someone has, or could point me in the direction of, some photos or diagrams for the JDM model.

The main difference is the lack of charcoal canister etc on the JDM & the fact that it's RHD so the servo, cruise etc are on opposite sides. Like I say, it's pretty much there but anything that shows the actual JDM setup would be brilliant just to confirm everything...

Cheers, Dan.

11-12-2009, 05:06 PM	#1
MA70-3.0GT 12psi boost Join Date: Oct 2009 Location: Crewe, England Posts: 356	Vacuum line layout for 1989 JDM turbo? As per the title really, I've been going off USDM photos & diagrams for the vacuum pipe routing on my '89my JDM Supra with 7m-gte lump & while I think it's pretty much there I'd really appreciate if someone has, or could point me in the direction of, some photos or diagrams for the JDM model. The main difference is the lack of charcoal canister etc on the JDM & the fact that it's RHD so the servo, cruise etc are on opposite sides. Like I say, it's pretty much there but anything that shows the actual JDM setup would be brilliant just to confirm everything... Cheers, Dan. __________________ '89 MA70 Supra GT aero 3.0turbo JDM, Rebuilt motor, K&N intake, 3" stainless turbo-back. New turbo and braided line kit... '89 Honda NC27 400, NC23 cams, open pipe, PC36a shock & possibly Showa USD forks... '83 Yamaha 29R XJ750E-II, number 69 off the line, only runner in the country? Original except Koni shocks '95 Honda PC26 CB500R, Winter hack, hateful, trying to sell it I'm not paranoid, they really ARE after me!!!