know any CAMS?

midwestmk2 · 03-13-2010, 03:39 AM

If you can get ahold of some HKS ones or some GUDE regrinds you should get what you are looking for.. There also have been some guys who have theirs reground to their own spec you will just have to source out a company who will or can do it.. There are some who have shaved the cam towers just to increase the valve lift and gain some power but you will have to reposition the tensioner a little more than stock to make up for the slack in the timing belt..

03-13-2010, 03:39 AM	#2
midwestmk2 3" Exhaust Join Date: May 2005 Location: STL ,MO. Posts: 206	If you can get ahold of some HKS ones or some GUDE regrinds you should get what you are looking for.. There also have been some guys who have theirs reground to their own spec you will just have to source out a company who will or can do it.. There are some who have shaved the cam towers just to increase the valve lift and gain some power but you will have to reposition the tensioner a little more than stock to make up for the slack in the timing belt.. __________________ 83 p-type,5spd,4;10 gears,New 86 cressida 5MGE 195hp,HKS metal head gasket,Cressida injectors,d-port intake runners,No EGR,No cat,Tweaked MAF,Custom cold air intake,Custom rear strut bar,Perfection clutch,Custom 3inch exhaust,4inch bazooka muffler,,Only 2700lbs,, COME AND GET IT!IF YOU DARE!! Please no Honduuuuhhhs!!! http://www.cardomain.com/ride/858848/2