Not Passing emission's :-(

SDK · 03-25-2010, 09:19 PM

So setting it the timing with jumper in. do i set it to 0 on the crank pulley and then pulling out the jumper it will set it self to 10 degree or 12 what ever it should be.

The idle is at 780 most to all the time.

03-25-2010, 09:19 PM	#8
SDK Stock Join Date: Dec 2009 Location: Seattle Posts: 16	So setting it the timing with jumper in. do i set it to 0 on the crank pulley and then pulling out the jumper it will set it self to 10 degree or 12 what ever it should be. The idle is at 780 most to all the time.