valve noise
I've been expriencing a couple of differenet tapping / knocking noises. The loudest noise happens during start up but goes away when the oil pressure increases. The other noise sounds a little like a lifter tapping.
So, today I took the cam covers off and checked the clearances on my valves. All of the intake valves had .010 clearance except the furthest one back on 4 and 5. Both of them had .011 clearance. All of the exhaust valves were at .012 clearance. Would only 2 of the valves being out only .001 be enough to cause such a dramatic noise?
|