hotwiring help ! ! ! !

supraluver4life · 04-27-2010, 07:24 PM

so i jumped the white w/ red stripe to the black with orange stripe and i guess the black one is a ground and the white one is +. the tool i was using to bridge the two got really hot and burned my finger badly hahahaha. so those are obviously incorrect for this car. another thing is i am assuming the solid white wire is supposed to also be a + but on this car its not hot. (no power). so thank you for the help but im really starting to get upset at this car. any other help would be greatly appreciated.

04-27-2010, 07:24 PM	#7
supraluver4life 3" Exhaust Join Date: Nov 2009 Location: Santa Fe, NM Posts: 135	so i jumped the white w/ red stripe to the black with orange stripe and i guess the black one is a ground and the white one is +. the tool i was using to bridge the two got really hot and burned my finger badly hahahaha. so those are obviously incorrect for this car. another thing is i am assuming the solid white wire is supposed to also be a + but on this car its not hot. (no power). so thank you for the help but im really starting to get upset at this car. any other help would be greatly appreciated. __________________ Cusco front, Tein Rear coilovers Massive DDP, 3'' custom catless exhaust, Tsudo muffler 4.5'' outlet, Apexi cold air intake, Act stage 3 clutch, ct26 turbo (stock)- 10psi +300rwhp "Not driving a car because its too nice, is like not fucking your gf so shes still tight for the next guy"