I had a shorted knock sensor cable (there are two). The engine light came on but it ran normally.
If you are going to replace a knock sensor (broke off the plastic stalk), get one used from the parts yard, eBay, Craig's list, ect. I believe a 1 1/8" or a 1 1/4" socket fits it. Make sure its not a short in the wiring harness if your knock sensor is undamaged. I ruined 2 taking the starter off different times. Turned out
it was the main fuel pump relay. The engine would not crank when it was hot after stopping and sitting.
Last edited by Bru; 07-19-2010 at 05:12 PM.
|