2JZGTE Crank torque specs

ausupra · 11-23-2010, 02:35 PM

Thanks again.

Yeah, I wanted the specs for the mains. I have got the Titan Billet Main caps, ARP head and main studs, Titan Billet Pistons, BC rods - I decided this was the year to finally get things going, but now that I've set the goal at a different level, it seems lots of the mechs I've gone to don't know how to take it to that level.

I have a mech working with me, he knows the assembly, but we were torquing it at 90lb/ft, which some people replied with a

about, while some thought it was fine, and should even be torqued more. So, I thought I'd go back to basics and try to get the stock amount, and I had it recommended it to me that I go 15lb/ft over but I just couldn't find stock anywhere to have a number to go off and felt like I'd read the spots of the TSRM.

Thanks for any advice you could give. I've gone through 3 blocks now and am giving up!

11-23-2010, 02:35 PM	#5
ausupra Stock Join Date: Nov 2010 Location: UAE Posts: 3	Thanks again. Yeah, I wanted the specs for the mains. I have got the Titan Billet Main caps, ARP head and main studs, Titan Billet Pistons, BC rods - I decided this was the year to finally get things going, but now that I've set the goal at a different level, it seems lots of the mechs I've gone to don't know how to take it to that level. I have a mech working with me, he knows the assembly, but we were torquing it at 90lb/ft, which some people replied with a about, while some thought it was fine, and should even be torqued more. So, I thought I'd go back to basics and try to get the stock amount, and I had it recommended it to me that I go 15lb/ft over but I just couldn't find stock anywhere to have a number to go off and felt like I'd read the spots of the TSRM. Thanks for any advice you could give. I've gone through 3 blocks now and am giving up!