Problem after rebuild

xThermoNucleaRx · 01-26-2011, 12:07 AM

I recently rebuilt my motor due to a BHG and thought that I should go ahead and do the whole motor. After getting everything in place I hook up the battery and won't start. The engine is just rotating very slowly. So I put the battery on a charger overnight and today when I put the battery back in, it rotates for about 1/2 a sec and then nothing. Before this happened I tested all my lights and signals. I went and got a new battery(it was kinda old anyways so i thought might as well; right cca and all that) and put it in and still nothing. Not even the door ajar light is on.

Any help is appreciated.

01-26-2011, 12:07 AM	#1
xThermoNucleaRx Stock Join Date: Jul 2010 Location: Oklahoma Posts: 26	Problem after rebuild I recently rebuilt my motor due to a BHG and thought that I should go ahead and do the whole motor. After getting everything in place I hook up the battery and won't start. The engine is just rotating very slowly. So I put the battery on a charger overnight and today when I put the battery back in, it rotates for about 1/2 a sec and then nothing. Before this happened I tested all my lights and signals. I went and got a new battery(it was kinda old anyways so i thought might as well; right cca and all that) and put it in and still nothing. Not even the door ajar light is on. Any help is appreciated.