View Single Post
Old 05-26-2011, 02:54 AM   #4
pwpanas
Supra Owner
 
pwpanas's Avatar
 
Join Date: Oct 2005
Location: GA, USA
Posts: 2,209
pwpanas is on a distinguished road
Default

Quote:
Originally Posted by tayman1975 View Post
Ok it needs to get tuned next month. The rev limiter has been set at 4800rpm then cuts out. I see it goes up to about 11psi. first gear goes up to 5psi. I dont know what cams. 6 speed.
Does it have an upgraded fuel system? Are the CP pistons at the stock compression ratio (CR)?
You really do need to find out what cams it has. Worst case, you can always remove them and get them measured. Without this info, I can't tell you how much power it should make.

Assuming oem CR pistons:
1) On the stock fuel system, don't push it past about 550rwhp or it will run lean and bad things will happen to the engine. 550rwhp will require race fuel ... probably 100 MON octane at least.
2) If you have an upgraded fuel system, it'll do about 700rwhp on the oem cams. This will require race fuel - probably 110 MON octane at least.
3) With an upgraded fuel system and upgraded cams, you can hit 775rwhp with that turbo. Use 116 MON octane race fuel to hit this number.
__________________
Phil '94 Supra Turbo, 6spd, 'APU'+
Displacement is no replacement for boost.
Life begins at 30psi.


NB: Please consider posting any help requests in a new thread instead of asking me for help privately. About 99.9+% of the time, private help requests end up covering great information that could be very valuable to other forum members. If you have a good reason for needing the help request to be private, I'll consider it. If not, then why not give everyone else the opportunity to pitch in too, and/or learn from the information? Remember, there's no such thing as a dumb question. We're all here to help within this family of Supra owners.

Last edited by pwpanas; 05-26-2011 at 02:56 AM.
pwpanas is offline   Reply With Quote