Hello Mk3 Owners

Turboron_99 · 12-13-2011, 03:43 AM

Okay So i Have been one busy bee with the Supra, So far the things i have done.

I have pulled the motor out just to do some Pre-Problematic Maintenace.

Things i did.

1. Removed Head, Had shaved. they removed .004 to get it flat. I was Suprised.
2. While the head was out, had Turbo Rebuilt.
3. Installed ARP headstud.
4. Took the oil pan off to inspect pan, just looking for shaving chunks that kinda thing. Check all bearing.
5. Replace front and rear seals,
6. Fixed Leaky Power stearing pump and lines.

7. Supra went together today, took it for a drive man it is a blast now.

Mods so far, are a simple 3" Turbo Back, Intake, and With the new turbo I shimmed the wastegate with a 7/16" custom shim.

I will upload some pictures when it is warm enough to wash it. Right now it is a hot 12 degrees outside!

12-13-2011, 03:43 AM	#4
Turboron_99 Stock Join Date: Nov 2011 Location: Oak Harbor Wa Posts: 24	Okay So i Have been one busy bee with the Supra, So far the things i have done. I have pulled the motor out just to do some Pre-Problematic Maintenace. Things i did. 1. Removed Head, Had shaved. they removed .004 to get it flat. I was Suprised. 2. While the head was out, had Turbo Rebuilt. 3. Installed ARP headstud. 4. Took the oil pan off to inspect pan, just looking for shaving chunks that kinda thing. Check all bearing. 5. Replace front and rear seals, 6. Fixed Leaky Power stearing pump and lines. 7. Supra went together today, took it for a drive man it is a blast now. Mods so far, are a simple 3" Turbo Back, Intake, and With the new turbo I shimmed the wastegate with a 7/16" custom shim. I will upload some pictures when it is warm enough to wash it. Right now it is a hot 12 degrees outside!