No Spark after swap! Help

Conga1991 · 11-03-2010, 02:27 AM

So I already had a thread on why my car wouldnt start and it was a bad wire in the harness, so I replaced the harness with the proper one, 1987 manual harness. The ECU is 87 manual. So after turning over my engine plenty of times, there is no spark. I checked the coil pack by taking it to my friends and it worked fine, tested the igniter for 12 Volts and there was and lastly replaced the cps due to corrosion on the wires and timed it and still nothing!!

I dont know what it could be, but my friend said to check the crank shaft position sensor, is there one on the gte??? Any and every advice is greatly appreciated! =]

If you need more details, ask and ill let you know.

11-03-2010, 02:27 AM	#1
Conga1991 3" Exhaust Join Date: Jun 2009 Location: Avondale, AZ Posts: 169	No Spark after swap! Help So I already had a thread on why my car wouldnt start and it was a bad wire in the harness, so I replaced the harness with the proper one, 1987 manual harness. The ECU is 87 manual. So after turning over my engine plenty of times, there is no spark. I checked the coil pack by taking it to my friends and it worked fine, tested the igniter for 12 Volts and there was and lastly replaced the cps due to corrosion on the wires and timed it and still nothing!! I dont know what it could be, but my friend said to check the crank shaft position sensor, is there one on the gte??? Any and every advice is greatly appreciated! =] If you need more details, ask and ill let you know.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
7mgte swap vs 1jz swap	Supra Saiyan	MKIII Supra	15	04-24-2012 02:58 AM
No spark issues	DDBT	MKII Supra	2	01-06-2009 07:08 AM
7mgte swap no spark	supra4life1386	MKIII Supra	5	11-27-2008 07:57 PM
NGK Spark Plugs	91 Supra	MKIII Supra	5	08-07-2007 03:52 AM
1JZGTE swap question	supradaddy0803	MKIII Supra	1	04-12-2007 04:56 PM