doin a 1jzgte swap into my 90 na, have the round motor mounts from the original 7m. the 1jz wont go into place with those mounts on. i can get it into place when i take the round rubber off. someone tell me what im doin wrong!!! thanks

cliffaboi311

I have a problem with my car and I am having difficulty finding assistance. I hear water or gurgling in the dash area, smell antifreeze when the air conditioner is on and the air is very cold. Refrigerant was changed last summer from the R12 due to problems with the cooling system blowing warm air. I no longer trust mechanics with the car because they are not familiar with the engine. (7MGTE) and they can't find out what the problem is. Any suggestions?

Sgris

in need of radiator fan cover, bolts that hold down distributer, and cool pump relay sensor. 89 supra turbo

giverpig

so i took my car to canadina tire for oil change and got my motor washed. the leak appeared to be behind the cam coevr, so i took it off and its coming out of the left cam seal. does any body now how to fix. i have the hanse manual and i will follow it close, but any suggestions would help.just bought the car. as well the odometer and temp gague is not working

1989 7mgte
upgraded exhust 2.5
upgrade head gasket
boosted turbo 12psi

giverpig

the spark plugs (2 of them) where in the wrong order. she was backfiring and running a bluish clear smoke. the distributer was only bolted with one bolt, and some of the hoses are not full hoses instead one size put in another, and not clamped, should i worrie, im going to switch them eventuly but is it entierly important

giverpig