|
|
02-23-2011, 08:00 AM
|
#1 |
|
Intake
Join Date: Apr 2010
Location: Tennessee
Posts: 40
 |
The guy that put the new engine in ran a new harness. What made it a premium sound package?
__________________
89 mkIII turbo supra stick black w/ maroon interior!!! |
|
|
|
02-23-2011, 10:25 AM
|
#2 |
 Toyota Racing Development Join Date: Apr 2007
Posts: 5,038
 |
The premium package went through a couple evolutions, but basically there was an external amp which was integrated with the upgraded head unit, and the car had 2 (or more in later models) additional speakers.
I'm going to go out on a limb here and suggest that the guy who worked on your engine only put in a new engine harness not replacing all 7 (or however many) harnesses there are threaded all across the car. Look in the TEWD and look in your car for an amplifier.
__________________
If something breaks or you need to contact a member of the administration please post HERE. Unless it's a private or administration matter please post it on the forum. It benefits no one else if car related questions aren't posted for future users and takes away from the time I'm able to spend helping on the rest of the forum. If you're so inclined I'm always more than happy to accept tips via PayPal.  Tip Jar --->  |
|
|
|
|
02-23-2011, 10:33 PM
|
#3 |
|
Intake
Join Date: Apr 2010
Location: Tennessee
Posts: 40
|
Yes just the engine harness and I have like six speakers n the car so it might be. And the amp would b hooked up with the head unit anyway right? If I was to solder the radio wires directly to the stock wires would that bypass it? I will check out the wiring diagrams n see what I can come up with. What does the amp have to do with the subs not hitting?
__________________
89 mkIII turbo supra stick black w/ maroon interior!!! |
|
|
|
|
02-23-2011, 11:00 PM
|
#4 |
|
Toyota Racing Development Join Date: Apr 2007
Posts: 5,038
|
Oh, sorry... So the rest of the system works, just not the subs? Does the amp have a signal line and if so, did you remember to connect it and is it the right signal type for the deck's trigger (positive or negative)?
__________________
If something breaks or you need to contact a member of the administration please post HERE. Unless it's a private or administration matter please post it on the forum. It benefits no one else if car related questions aren't posted for future users and takes away from the time I'm able to spend helping on the rest of the forum. If you're so inclined I'm always more than happy to accept tips via PayPal. Tip Jar ---> |
|
|
|
 |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| can you make these work with a 1jz swap..? | JZA70dood | Non-Generation Specific Questions | 0 | 08-12-2009 04:17 PM |
| Headlights only work on High Beam - is it a fuse? | t4yl0r10 | Non-Generation Specific Questions | 8 | 01-18-2008 03:56 PM |
| N20 and HeAd WoRk | Supra_87_mk3 | Non-Generation Specific Questions | 4 | 05-25-2007 03:09 PM |
| Dash lights Don't Work | supra67 | Non-Generation Specific Questions | 4 | 09-05-2006 04:58 AM |
| Dash lights Don't Work!! | supra67 | MKIII Supra | 0 | 08-10-2006 01:11 AM |
Hybrid Mode
