AUdio SETUP! SOme help thanks

caraudio · 10-06-2005, 09:25 PM

Hey i have some lanzar heritage serise subs which are great. I got 2 12" 124D's in a Band Pass 4 port box. Now with a Vibe 248 amp pushing 500RMS per channel its good only thing amps getting kinda really hot so at these settings it sounds n hits fine just the heat issue:
HU Settings:

Bass +12
Trebel +12
Sub Lvl +2db (max +/-6db)
Sq Set 60hz+6 (can be +12 or 0)
LPF 80Hz
HPF 180Hz

Amp Settings:
Amp level is about 85%- 90 up.

LPF about 25% like that on the amp gain to the left so you can turn it up more but its pretty low.

HPF about 70% to the right of the adjust(gain) knob.

Freq Amp set: Low

Thoes are my settings

These are the settings so ya maybe any one have any reccomendations and stuff id love for some help at fine tuning my system. My hole system is.

Panasonic 50x4 watt deck
2 Infinity 6002i's
2 lanzar 12" 124Ds 1000RMS
1 Vibe 248 amp 500rms at 2ohms / chan.

THANKS!

So ya im just curriouse what should the gains be at and are the HU settings accurate? Because im trying to figure out a nice setting for HPF and LPF to get a nice GOOOD sounding hard hitting base sound.

suprafann · 01-05-2006, 08:10 AM

agh those gains are outta wack.....ill tell you quick if u got time u would wanna.....put everythign as 0, put the deck at the volume you usually lsiten to....than tweek yoru amp until its distorts, put it back down a bit..than tune yoru deck

This is what ideally i think it should be, every system is different

BASS = 0
TREBLE = 0 +1 OR +2 OR +3
SUB LEVEL + 3
LPF = 80
HPF = 120-160-180

Amp gain, no more than 75%
LPF = 30-40%
HPF = 60-70%

and ya the subs get a low frew and the fronts get a high freq

your amps getting ht because everythings almost maxed out

10-06-2005, 09:25 PM	#1
caraudio Stock Join Date: Oct 2005 Posts: 2	AUdio SETUP! SOme help thanks Hey i have some lanzar heritage serise subs which are great. I got 2 12" 124D's in a Band Pass 4 port box. Now with a Vibe 248 amp pushing 500RMS per channel its good only thing amps getting kinda really hot so at these settings it sounds n hits fine just the heat issue: HU Settings: Bass +12 Trebel +12 Sub Lvl +2db (max +/-6db) Sq Set 60hz+6 (can be +12 or 0) LPF 80Hz HPF 180Hz Amp Settings: Amp level is about 85%- 90 up. LPF about 25% like that on the amp gain to the left so you can turn it up more but its pretty low. HPF about 70% to the right of the adjust(gain) knob. Freq Amp set: Low Thoes are my settings These are the settings so ya maybe any one have any reccomendations and stuff id love for some help at fine tuning my system. My hole system is. Panasonic 50x4 watt deck 2 Infinity 6002i's 2 lanzar 12" 124Ds 1000RMS 1 Vibe 248 amp 500rms at 2ohms / chan. THANKS! So ya im just curriouse what should the gains be at and are the HU settings accurate? Because im trying to figure out a nice setting for HPF and LPF to get a nice GOOOD sounding hard hitting base sound.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
MKIII Setups?	ozsupra	Car Audio and Alarms	16	04-29-2009 02:08 AM
what clutch and flywheel setup??	boner1115	MKIII Supra	2	06-12-2007 04:53 AM
audio for 87 supra	y8Dgr8	MKIII Supra	5	07-09-2006 12:30 AM
Wanted!!! Stock supra twin turbo setup	TIM!	Non-Generation Specific Questions	0	02-07-2005 04:24 PM

01-05-2006, 08:10 AM	#2
suprafann 3" Exhaust Join Date: Dec 2005 Posts: 58	agh those gains are outta wack.....ill tell you quick if u got time u would wanna.....put everythign as 0, put the deck at the volume you usually lsiten to....than tweek yoru amp until its distorts, put it back down a bit..than tune yoru deck This is what ideally i think it should be, every system is different BASS = 0 TREBLE = 0 +1 OR +2 OR +3 SUB LEVEL + 3 LPF = 80 HPF = 120-160-180 Amp gain, no more than 75% LPF = 30-40% HPF = 60-70% and ya the subs get a low frew and the fronts get a high freq your amps getting ht because everythings almost maxed out