door molding coming off...

MK3_supragirl · 08-24-2010, 07:05 PM

Anybody have any ideas for reapplying exterior door molding? Its about 3" wide and aluminum. I've tried 3M double-sided tape, followed directions exactly but it wasn't strong enough, just popped right back up after 5mins. The clips that used to be on the molding are broken off and looks like the PO used some sort of adhesive on the molding. What else should I try?

Travis89Turbo · 08-24-2010, 09:37 PM

I would try some fiberglass but it doesn't really stick to paint well so u would have to take paint and primer off to get bare metal. It wouldn take much area to hold it but the more the better. U can get some quick drying fiberglass repair at any parts supply store or even wal mart. Atleast the one by my place stocks it so im sure yours should have it.

cre · 08-25-2010, 01:25 AM

Denver, eh? Interesting. I know a lot of Supra owners out here... never met one female owner... actually not true, are you in your mid 60's, live in Cherry Creek and drive a mint 89+, white turbo? If so, we've never met but I've seen you on the road and the car parked out in front of your house a lot.

3" aluminum molding.... we're not talking about a Supra then. What is this mounting to and is it bare aluminum or painted or powder coated? How did you prep the two surfaces before trying the 3M tape and what type/grade of tape was it? There are many different 3M double stick tapes and a few different automotive tapes.

MK3_supragirl · 08-25-2010, 03:38 PM

Quote:

Originally Posted by cre

Denver, eh? Interesting. I know a lot of Supra owners out here... never met one female owner... actually not true, are you in your mid 60's, live in Cherry Creek and drive a mint 89+, white turbo? If so, we've never met but I've seen you on the road and the car parked out in front of your house a lot.

3" aluminum molding.... we're not talking about a Supra then. What is this mounting to and is it bare aluminum or painted or powder coated? How did you prep the two surfaces before trying the 3M tape and what type/grade of tape was it? There are many different 3M double stick tapes and a few different automotive tapes.

Female, yes, but not mid-60s in Cherry Creek....... mid-30s in Aurora. Possible you havn't seen me because I spend way too much time in my garage! I molest old bikes, spent this whole summer restoring and converting a 79 yama xs650 to a cafe racer. But that's a whole other forum....

Anyway, it most certainly is a supra, lol. 87 supra, 7m-GTE turbo, pearl white, in spectacular condition - although mechanically needs some tweaking. I tried to attach a photo, hopefully it attached.

Beneath the molding it's a painted surface, cleaned it with an all-purpose cleaning product but then wiped it down with rubbing alcohol. Don't have the tape in front of me but bought it at an auto parts store, pkg said it was for trim/molding etc. Think I'm going to try again, maybe didn't get the back of the molding clean enough. It's hard to get to that part without pulling molding off more.

Bill UK · 08-25-2010, 11:03 PM

I used a 3M Acrylic Foam tape for body moldings, Link If you put the roll under a 60 watt table lamp or pop it in the oven at about 45 centigrade for 10 minutes the adhesive becomes very sticky, should do the trick.

MK3_supragirl · 08-26-2010, 01:38 PM

Cool Bill UK, thanks for the tip! Will warm it up on my next attempt

cre · 08-28-2010, 01:49 AM

I'd replace the push clips too (unless the steel bracket they slide into has rusted away).

MK3_supragirl · 08-30-2010, 07:02 AM

Success! Finally got it to stick like glue. Re-cleaned both the painted surface of the door and the back of the molding, & again wiped with alcohol. Did it on a 90+ degree day too so the tape and door were really warm. Unfortunately Cre, the clips are rusted off,but as long as it stays put, I'm happy! thanks for everybody's help

Green7mgte · 08-30-2010, 02:27 PM

Quote:

Originally Posted by cre

are you in your mid 60's, live in Cherry Creek If so, we've never met but I've seen you on the road and the car parked out in front of your house a lot.

cre the supra stalker..

if i pass a supra in a parking lot ill park next to it and Waite for the guy to come out of the store just to go.. hey nice car. 2 supras parked side by side looks like an impromptu car show.

tiger123 · 09-29-2010, 10:22 AM

I used acrylic foam tape. hope helps?

08-24-2010, 07:05 PM	#1
MK3_supragirl Stock Join Date: Jun 2010 Location: Aurora CO Posts: 6	door molding coming off... Anybody have any ideas for reapplying exterior door molding? Its about 3" wide and aluminum. I've tried 3M double-sided tape, followed directions exactly but it wasn't strong enough, just popped right back up after 5mins. The clips that used to be on the molding are broken off and looks like the PO used some sort of adhesive on the molding. What else should I try?

08-24-2010, 09:37 PM	#2
Travis89Turbo 12psi boost Join Date: Jul 2010 Location: Utah Posts: 332	I would try some fiberglass but it doesn't really stick to paint well so u would have to take paint and primer off to get bare metal. It wouldn take much area to hold it but the more the better. U can get some quick drying fiberglass repair at any parts supply store or even wal mart. Atleast the one by my place stocks it so im sure yours should have it. __________________ 1995 Toyota Supra SE 71k miles. Master power T70 stock 2jzge 1989 Toyota Supra. 1jzgte swap 5 speed of course.. Driftmotion 60-1 single turbo kit. Cxracing FMIC. 2jz 550cc injectors... soon to come..... EMS Stinger. BC 264 cams 680cc injectors Spec stage 4 clutch and A LOT of boost!------SOLD 1999 Ford F350 diesel 2004 Jaguar XJR Supercharged If it hasnt broke you haven pushed it hard enough!!

08-25-2010, 01:25 AM	#3
cre Toyota Racing Development Join Date: Apr 2007 Posts: 5,038	Denver, eh? Interesting. I know a lot of Supra owners out here... never met one female owner... actually not true, are you in your mid 60's, live in Cherry Creek and drive a mint 89+, white turbo? If so, we've never met but I've seen you on the road and the car parked out in front of your house a lot. 3" aluminum molding.... we're not talking about a Supra then. What is this mounting to and is it bare aluminum or painted or powder coated? How did you prep the two surfaces before trying the 3M tape and what type/grade of tape was it? There are many different 3M double stick tapes and a few different automotive tapes. __________________ If something breaks or you need to contact a member of the administration please post HERE. Unless it's a private or administration matter please post it on the forum. It benefits no one else if car related questions aren't posted for future users and takes away from the time I'm able to spend helping on the rest of the forum. If you're so inclined I'm always more than happy to accept tips via PayPal. Tip Jar --->

08-28-2010, 01:49 AM	#7
cre Toyota Racing Development Join Date: Apr 2007 Posts: 5,038	I'd replace the push clips too (unless the steel bracket they slide into has rusted away). __________________ If something breaks or you need to contact a member of the administration please post HERE. Unless it's a private or administration matter please post it on the forum. It benefits no one else if car related questions aren't posted for future users and takes away from the time I'm able to spend helping on the rest of the forum. If you're so inclined I'm always more than happy to accept tips via PayPal. Tip Jar --->

09-29-2010, 10:22 AM	#10
tiger123 Stock Join Date: Sep 2010 Location: leeds Posts: 2	I used acrylic foam tape. hope helps? __________________ For tailored car mats visit mycarmats.co.uk

08-25-2010, 11:03 PM	#5
Bill UK AEM EMS Join Date: Jul 2006 Location: UK Posts: 891	I used a 3M Acrylic Foam tape for body moldings, Link If you put the roll under a 60 watt table lamp or pop it in the oven at about 45 centigrade for 10 minutes the adhesive becomes very sticky, should do the trick.

08-26-2010, 01:38 PM	#6
MK3_supragirl Stock Join Date: Jun 2010 Location: Aurora CO Posts: 6	Cool Bill UK, thanks for the tip! Will warm it up on my next attempt

08-30-2010, 07:02 AM	#8
MK3_supragirl Stock Join Date: Jun 2010 Location: Aurora CO Posts: 6	Success! Finally got it to stick like glue. Re-cleaned both the painted surface of the door and the back of the molding, & again wiped with alcohol. Did it on a 90+ degree day too so the tape and door were really warm. Unfortunately Cre, the clips are rusted off,but as long as it stays put, I'm happy! thanks for everybody's help

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Occasional Clicking Sound (Blinker sound) coming from instrument cluster	Mike87	MKIII Supra	8	08-26-2010 02:29 AM
Why is this smoke coming from the turbo?	Turbotuner2.3	MKIII Supra	3	11-12-2007 03:30 PM
noise coming from rear of car?	merryprankster	MKIII Supra	2	06-21-2007 02:52 AM
look at what i got coming	joel w	MKIII Supra	38	01-15-2006 05:58 AM
Supra Girl Im Coming	ozsupra	Off Topic Forum	22	09-23-2004 03:43 AM