1uz - Page 4

cre · 03-20-2012, 08:33 PM

Slowly but surely.... I bet that's going to be a scream when it's done. I wish I had the time and money for a project like this. It's more the lack of funds holding me back.

CanadianBak'inSupra · 03-22-2012, 01:10 AM

considering buying a clutch real soon just so i can bolt all my drive train together...
on the topic of carbs, i think a holley avenger would be a nice pick. any one have any experience with carbs??

CanadianBak'inSupra · 03-29-2012, 12:31 PM

just a sneak peak. was originally planning on buying a holley avenger series carb. but then i seen these babies http://www.ebay.ca/itm/44-IDF-Weber-...item43ae88bcc1

4 weber idf downdraft carbs will be awesome...

CanadianBak'inSupra · 04-16-2012, 05:58 PM

almost done with my charging and starting system wiring. the funny thing is, the alternator plug on my ma61 appears to be exactly the same as the 91 ls400 plug, it just plugs in. i will check the wires later to be sure its the same internally. going to lordco today to buy new battery terminals and ground cable. i really want to buy some nice electric, heat, and oil pressure gauges.
kinda sucks, completion date is gona be set back again...

gona have to get a blower in a vehicle real soon.

damn DUI...

Click image for larger version

Name: DSC00276.jpg
Views: 331
Size: 295.3 KB
ID: 4545

Click image for larger version

Name: DSC00277.jpg
Views: 338
Size: 311.3 KB
ID: 4546

Click image for larger version

Name: DSC00278.jpg
Views: 304
Size: 292.6 KB
ID: 4547

mechrider89 · 07-05-2012, 02:54 AM

looks good man, that things going to haul like no other.

Live and learn, drinking and driving not smart!

CanadianBak'inSupra · 03-13-2013, 05:13 PM

Nearing the end of my corolla project. And have started prepping for the 92 1uzfe with under 50k miles I purchased through ebay. Complete with wiring ecu and auto trans for 1500usd. My orig 1uz just turned into a spare. Have my eye on a drop in alum welded griffin rad. Then I only need a ps cooler batter clutch and front drive shaft. This new 1uz will be run stock for now. Hoping to get it next week and running shortly after. Already have a good fuel pump for in the tank. Pictures soon

CanadianBak'inSupra · 03-25-2013, 01:38 AM

thats right. i got another one. decided on a more complete motor, lower miles,newer with slightly higher hp numbers. its a 1996 so its got cast fuel rails, new ecu lighter pistons and rods,and a plastic boddied kvafm also no egr.

updates coming soon as i am almost done wiring and i have some goodies being ordered and created

86supra · 03-26-2013, 11:21 PM

what engine is that i know toyota v8 is it the 5.7

CanadianBak'inSupra · 03-27-2013, 01:49 PM

its a 4L quad cam 32 valve 1996 1uzfe

CanadianBak'inSupra · 04-28-2013, 05:09 PM

Click image for larger version

Name: DSC00529.jpg
Views: 283
Size: 312.5 KB
ID: 4795

Click image for larger version

Name: DSC00530.jpg
Views: 296
Size: 303.4 KB
ID: 4796

big update coming soon. the rest of the drive train arrived.

03-20-2012, 08:33 PM	#31
cre Toyota Racing Development Join Date: Apr 2007 Posts: 5,038	Slowly but surely.... I bet that's going to be a scream when it's done. I wish I had the time and money for a project like this. It's more the lack of funds holding me back. __________________ If something breaks or you need to contact a member of the administration please post HERE. Unless it's a private or administration matter please post it on the forum. It benefits no one else if car related questions aren't posted for future users and takes away from the time I'm able to spend helping on the rest of the forum. If you're so inclined I'm always more than happy to accept tips via PayPal. Tip Jar --->

03-22-2012, 01:10 AM	#32
CanadianBak'inSupra Official hall monitor / search nazi - NO SOUP FOR YOU! Join Date: Oct 2009 Location: Canada, BC Posts: 837	considering buying a clutch real soon just so i can bolt all my drive train together... on the topic of carbs, i think a holley avenger would be a nice pick. any one have any experience with carbs?? __________________ 1984 supra - 1uzfe - w58 - 4.10 - 1 piece aluminum shaft.

03-29-2012, 12:31 PM	#33
CanadianBak'inSupra Official hall monitor / search nazi - NO SOUP FOR YOU! Join Date: Oct 2009 Location: Canada, BC Posts: 837	just a sneak peak. was originally planning on buying a holley avenger series carb. but then i seen these babies http://www.ebay.ca/itm/44-IDF-Weber-...item43ae88bcc1 4 weber idf downdraft carbs will be awesome... __________________ 1984 supra - 1uzfe - w58 - 4.10 - 1 piece aluminum shaft.

04-16-2012, 05:58 PM	#34
CanadianBak'inSupra Official hall monitor / search nazi - NO SOUP FOR YOU! Join Date: Oct 2009 Location: Canada, BC Posts: 837	almost done with my charging and starting system wiring. the funny thing is, the alternator plug on my ma61 appears to be exactly the same as the 91 ls400 plug, it just plugs in. i will check the wires later to be sure its the same internally. going to lordco today to buy new battery terminals and ground cable. i really want to buy some nice electric, heat, and oil pressure gauges. kinda sucks, completion date is gona be set back again... gona have to get a blower in a vehicle real soon. damn DUI... __________________ 1984 supra - 1uzfe - w58 - 4.10 - 1 piece aluminum shaft.

07-05-2012, 02:54 AM	#35
mechrider89 3" Exhaust Join Date: Feb 2011 Location: Saskatchewan Canada Posts: 117 Blog Entries: 1	looks good man, that things going to haul like no other. Live and learn, drinking and driving not smart! __________________ Officially joined the V-Dub club

03-13-2013, 05:13 PM	#36
CanadianBak'inSupra Official hall monitor / search nazi - NO SOUP FOR YOU! Join Date: Oct 2009 Location: Canada, BC Posts: 837	Nearing the end of my corolla project. And have started prepping for the 92 1uzfe with under 50k miles I purchased through ebay. Complete with wiring ecu and auto trans for 1500usd. My orig 1uz just turned into a spare. Have my eye on a drop in alum welded griffin rad. Then I only need a ps cooler batter clutch and front drive shaft. This new 1uz will be run stock for now. Hoping to get it next week and running shortly after. Already have a good fuel pump for in the tank. Pictures soon __________________ 1984 supra - 1uzfe - w58 - 4.10 - 1 piece aluminum shaft.

03-25-2013, 01:38 AM	#37
CanadianBak'inSupra Official hall monitor / search nazi - NO SOUP FOR YOU! Join Date: Oct 2009 Location: Canada, BC Posts: 837	thats right. i got another one. decided on a more complete motor, lower miles,newer with slightly higher hp numbers. its a 1996 so its got cast fuel rails, new ecu lighter pistons and rods,and a plastic boddied kvafm also no egr. updates coming soon as i am almost done wiring and i have some goodies being ordered and created __________________ 1984 supra - 1uzfe - w58 - 4.10 - 1 piece aluminum shaft.

03-26-2013, 11:21 PM	#38
86supra Stock Join Date: Mar 2013 Location: ohio Posts: 14	what engine is that i know toyota v8 is it the 5.7

03-27-2013, 01:49 PM	#39
CanadianBak'inSupra Official hall monitor / search nazi - NO SOUP FOR YOU! Join Date: Oct 2009 Location: Canada, BC Posts: 837	its a 4L quad cam 32 valve 1996 1uzfe __________________ 1984 supra - 1uzfe - w58 - 4.10 - 1 piece aluminum shaft.

04-28-2013, 05:09 PM	#40
CanadianBak'inSupra Official hall monitor / search nazi - NO SOUP FOR YOU! Join Date: Oct 2009 Location: Canada, BC Posts: 837	big update coming soon. the rest of the drive train arrived. __________________ 1984 supra - 1uzfe - w58 - 4.10 - 1 piece aluminum shaft.