|
|
04-07-2007, 02:44 PM
|
#1 |
|
Stock
Join Date: Feb 2007
Location: NEWNAN
Posts: 5
 |
crank pulley removal
Dude, I had the same problem
No help really with tool support. The impacts don't work. I ended up pulling the starter and wedging one of my long pry bars in the teeth to hold the crank. Granted I had the motor out at the time so it was easier. Just use a 1/2" 19mm with a long bar and it will break loose pretty easily. The flywheel is much larger, so the torque on the tooth is not a real issue, but be sure you have good surface contact and not a point load. Hope this helps out. No need for the SST, Waste of money. |
|
|
 |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Blown Head Gasket Symptoms! | Dejvid1785 | MKIII FAQ | 76 | 04-24-2011 07:59 PM |
| Blown Head Gasket Snake Oil | unkymurch | Non-Generation Specific Questions | 21 | 08-06-2010 02:11 AM |
| 1989 Supra blown head gasket | rayk5799 | Non-Generation Specific Questions | 6 | 05-18-2009 10:51 AM |
| Update: Blown Head Gasket Snake Oil - 8 months later | unkymurch | Non-Generation Specific Questions | 3 | 12-17-2008 09:35 PM |
| Head gasket repair | Kuban | MKIII Supra | 9 | 07-20-2007 09:01 PM |
Hybrid Mode
