Valve Assy, Air Control Broken~ Help

mkiiisupra · 11-10-2007, 10:20 PM

Need help with a problem i found while installing a kit from hose techniques

17630-70010 Valve Assy, Air Control http://www.cygnusx1.net/Supra/Librar...rts/17630.aspx

I found that one of the nozzle on this piece is broken off as well as the vacuum line currently being disconnected from the other nozzle on it.

So far this part seems to be about 175$......

But i have no idea about how to get to it to remove it.... any ideas?

mkiiisupra · 11-10-2007, 10:20 PM

oh also, what kind of problems does this not being connected cuase

mrnickleye · 11-11-2007, 12:05 AM

Follow the vacuum line over to the intake manifold, and cap it off. This valve is mounted on the power steering pump. It's function is to raise the idle slightly when you are idling, and turning the steering wheels. Like in a parking lot.

You can live without it.

be sure to plug the hole in the air intake on the intake 3" hose to prevent dirt from entering your engine thru the intake.

mkiiisupra · 11-11-2007, 01:25 AM

So cap it off at the hose 17343B ? is that the only place i need to cap it at?
http://www.cygnusx1.net/Supra/TechTi.../vacuum_2h.gif

Thanks

mkiiisupra · 11-11-2007, 03:49 AM

Bottom of Accordion Hose to Power Steering Idle up connection.

26.0

6.0

is that the other one u want me to cap off??

i have that line hooked up, but since that other section is busted i should close it off? and that wont interfere with any other parts of the vacuum line?

mrnickleye · 11-11-2007, 11:25 PM

Quote:

Originally Posted by mkiiisupra

So cap it off at the hose 17343B ? is that the only place i need to cap it at?
http://www.cygnusx1.net/Supra/TechTi.../vacuum_2h.gif

Thanks

YES. That pipe. Just put a vacuum plug on it. The other, on the accordian hose, needs capping too, so dirt won't enter the engine.

mkiiisupra · 11-12-2007, 03:00 AM

Quote:

Originally Posted by mrnickleye

YES. That pipe. Just put a vacuum plug on it. The other, on the accordian hose, needs capping too, so dirt won't enter the engine.

Refering to the vacuum line on the bottom of the accordian hose. Just wondering how this ties into that system. Curious is all

Thanks alot for the clerification

mkiiisupra · 11-12-2007, 10:50 PM

coming from the bottom of the accordian hose.
So i am guessing then, that this vacuum line is not routed properly? or is it?

If not what plugs into the metal line that comes out of the bottom of the charcoal canister

11-10-2007, 10:20 PM	#1
mkiiisupra Lexus & 550's Join Date: Sep 2007 Location: Las Vegas, NV Posts: 570 Blog Entries: 1	Valve Assy, Air Control Broken~ Help Need help with a problem i found while installing a kit from hose techniques 17630-70010 Valve Assy, Air Control http://www.cygnusx1.net/Supra/Librar...rts/17630.aspx I found that one of the nozzle on this piece is broken off as well as the vacuum line currently being disconnected from the other nozzle on it. So far this part seems to be about 175$...... But i have no idea about how to get to it to remove it.... any ideas?

11-11-2007, 12:05 AM	#3
mrnickleye 1000whp postwhore Join Date: Jun 2005 Location: Mojave Desert, Calif. Posts: 1,705	Follow the vacuum line over to the intake manifold, and cap it off. This valve is mounted on the power steering pump. It's function is to raise the idle slightly when you are idling, and turning the steering wheels. Like in a parking lot. You can live without it. be sure to plug the hole in the air intake on the intake 3" hose to prevent dirt from entering your engine thru the intake. __________________ Had a Red 1989 N/A. Automatic. Sports Pkg. w/wing. TEMS, and some nice MODS. Sold to a friend 10/08/08.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Air Control Valve	nickvash0104	MKIII Supra	0	03-07-2006 06:26 PM

11-11-2007, 01:25 AM	#4
mkiiisupra Lexus & 550's Join Date: Sep 2007 Location: Las Vegas, NV Posts: 570 Blog Entries: 1	So cap it off at the hose 17343B ? is that the only place i need to cap it at? http://www.cygnusx1.net/Supra/TechTi.../vacuum_2h.gif Thanks

11-11-2007, 03:49 AM	#5
mkiiisupra Lexus & 550's Join Date: Sep 2007 Location: Las Vegas, NV Posts: 570 Blog Entries: 1	Bottom of Accordion Hose to Power Steering Idle up connection. 26.0 6.0 is that the other one u want me to cap off?? i have that line hooked up, but since that other section is busted i should close it off? and that wont interfere with any other parts of the vacuum line?

11-12-2007, 10:50 PM	#8
mkiiisupra Lexus & 550's Join Date: Sep 2007 Location: Las Vegas, NV Posts: 570 Blog Entries: 1	coming from the bottom of the accordian hose. So i am guessing then, that this vacuum line is not routed properly? or is it? If not what plugs into the metal line that comes out of the bottom of the charcoal canister