Master reuild kit!!

tokis · 11-24-2007, 09:44 PM

Well I'm planning to rebuild my motor. So i came across this Master rebuild kit, but dont know if its a good kit. Has anyone tried this kit of heard of it?

http://www.enginepartsstore.com/servlet/Detail?no=565

west_side_supra · 11-24-2007, 10:17 PM

well thats pretty sweet little kit, but if you are wanting any performance that isnt the way to go, as for what i would buy extra, greddy timing belt, ARP head bolts/studs, and the HKS MGH. now i didnt see if it came with any pumps like the oil/water/power steering ect.. but other than that i'm using the same bearings :P thats really about it

tokis · 11-25-2007, 12:31 AM

I not trying to go to extreme. Just around 300 to 350 rwhp it does come with a new oil pump. But for the rest i got it, but whats a HKS MGH? is that kit a OEM stock part?i dont want know cheap aftermarket one

supramacist · 11-25-2007, 02:21 AM

You may be in over your head dude.

An mhg= metal head gasket
hks= brand of metal head gasket.

Not the cheapest shite around.
My 2.mm hks stopper mhg was right around 350 cash.

You need to do some research urgently.
Because this is a real good way for you to waste a car, not knowing what you are doing,

www.horsepowerfreaks.com

These guys have everything you need except for the torque wrench.

west_side_supra · 11-25-2007, 07:41 AM

i got my stopper for 150$ EBAY !!! lol its da shit. acually i think i have gotten almost everything through ebay and have probably saved about 2k$ i think the most expensive stuff i got were the JE pistons and eagle rods and the HKS EVC. other than that everything was almost 30%-50% off the retail prices. but i have ordered a couple things trough HPfreaks "turbonetics manifold and some hose's" and also Supra sport has been very nice also.

supramacist · 11-26-2007, 08:14 PM

Everytime I order something from ebay wich has been twice someone takes my money and I get no parts. I avoid that place like the plague.

11-24-2007, 09:44 PM	#1
tokis Stock Join Date: Nov 2007 Location: phoenix Posts: 19	Master reuild kit!! Well I'm planning to rebuild my motor. So i came across this Master rebuild kit, but dont know if its a good kit. Has anyone tried this kit of heard of it? http://www.enginepartsstore.com/servlet/Detail?no=565

11-24-2007, 10:17 PM	#2
west_side_supra 12psi boost Join Date: Sep 2006 Location: Marysville Washington Posts: 353	well thats pretty sweet little kit, but if you are wanting any performance that isnt the way to go, as for what i would buy extra, greddy timing belt, ARP head bolts/studs, and the HKS MGH. now i didnt see if it came with any pumps like the oil/water/power steering ect.. but other than that i'm using the same bearings :P thats really about it __________________ 7MGTE - 500hp never dyno'd exhaust: 3inch pipes no cat/powerhouse manifold/garret gt47 18psi/HKS SS racing wastegate fidenza cam gears intake: PHR 4inch intake/K&N filter/3 inch intercooler/ pipeFMIC/greddy type R bov/ fuel: 550cc PTE/ walbro 255lp / Aeromotive adj pressure regulator transmission: Fidenza flywheel/ACT extreme kit electronics: map ecu 1 / HKS EVC 9 gauges:boost,EGT,oil temp & pressure/aem AFR

11-25-2007, 07:41 AM	#5
west_side_supra 12psi boost Join Date: Sep 2006 Location: Marysville Washington Posts: 353	i got my stopper for 150$ EBAY !!! lol its da shit. acually i think i have gotten almost everything through ebay and have probably saved about 2k$ i think the most expensive stuff i got were the JE pistons and eagle rods and the HKS EVC. other than that everything was almost 30%-50% off the retail prices. but i have ordered a couple things trough HPfreaks "turbonetics manifold and some hose's" and also Supra sport has been very nice also. __________________ 7MGTE - 500hp never dyno'd exhaust: 3inch pipes no cat/powerhouse manifold/garret gt47 18psi/HKS SS racing wastegate fidenza cam gears intake: PHR 4inch intake/K&N filter/3 inch intercooler/ pipeFMIC/greddy type R bov/ fuel: 550cc PTE/ walbro 255lp / Aeromotive adj pressure regulator transmission: Fidenza flywheel/ACT extreme kit electronics: map ecu 1 / HKS EVC 9 gauges:boost,EGT,oil temp & pressure/aem AFR

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
How hard is the clutch master cylinder to replace?	the#1	MKII Supra	2	05-27-2016 04:32 AM
brake master cyl.	tak2099	MKIII Supra	2	08-19-2008 11:27 PM
Master rebuild?	h8z2luze	MKIII Supra	5	05-22-2007 05:16 AM
Maintenance brake and clutch master cylinder fluid	IHateHacks	MKIII Supra	1	04-18-2007 07:15 PM

11-25-2007, 12:31 AM	#3
tokis Stock Join Date: Nov 2007 Location: phoenix Posts: 19	I not trying to go to extreme. Just around 300 to 350 rwhp it does come with a new oil pump. But for the rest i got it, but whats a HKS MGH? is that kit a OEM stock part?i dont want know cheap aftermarket one

11-25-2007, 02:21 AM	#4
supramacist 1000whp postwhore Join Date: Apr 2007 Location: Escape from the Prison Planet Posts: 1,356	You may be in over your head dude. An mhg= metal head gasket hks= brand of metal head gasket. Not the cheapest shite around. My 2.mm hks stopper mhg was right around 350 cash. You need to do some research urgently. Because this is a real good way for you to waste a car, not knowing what you are doing, www.horsepowerfreaks.com These guys have everything you need except for the torque wrench.

11-26-2007, 08:14 PM	#6
supramacist 1000whp postwhore Join Date: Apr 2007 Location: Escape from the Prison Planet Posts: 1,356	Everytime I order something from ebay wich has been twice someone takes my money and I get no parts. I avoid that place like the plague.