good engine

west_side_supra · 12-23-2007, 11:20 PM

ebay motor

i found a motor on ebay has some good stuff so far no one has bid on it and its only at 300$ so if anyone is lookin for a motor with some extra items here u go

86SupraMan · 12-26-2007, 10:10 PM

Recommended u DONT buy it from him.
1.) engine looks pretty beat up, extras or no, are you sure it runs? do u want the problem of fixing it should it not run?

2.) i bought a 7MGE from ebay, totally screwed. paid 2600 for install + 800 for purchase just to find out engine was a piece. now im having my old bottem end machined and pretty much its gettin the full meal deal to get this puppy runnin. imo dont buy from ebay unless their gonna give u a wicked good return policy

3.) look at their buyers feedback, sure, he has 100%, but there are only 2 comments, and from the same guy.. i find a touch suspicious.

89n/aA/T-2turbo5spd · 01-20-2008, 05:42 PM

Never buy an engine in pieces, people can/and will lie to make money.

89wna · 01-23-2008, 05:08 AM

U might as well get a motor thats already f*cked up .
do it right the 1st time. buy a long block or good jdm.

west_side_supra · 01-23-2008, 06:10 AM

its a good motor for spare parts, or to build from the ground up. thats all i was sayin, not build it from the parts you get from the bid

12-23-2007, 11:20 PM	#1
west_side_supra 12psi boost Join Date: Sep 2006 Location: Marysville Washington Posts: 353	good engine ebay motor i found a motor on ebay has some good stuff so far no one has bid on it and its only at 300$ so if anyone is lookin for a motor with some extra items here u go __________________ 7MGTE - 500hp never dyno'd exhaust: 3inch pipes no cat/powerhouse manifold/garret gt47 18psi/HKS SS racing wastegate fidenza cam gears intake: PHR 4inch intake/K&N filter/3 inch intercooler/ pipeFMIC/greddy type R bov/ fuel: 550cc PTE/ walbro 255lp / Aeromotive adj pressure regulator transmission: Fidenza flywheel/ACT extreme kit electronics: map ecu 1 / HKS EVC 9 gauges:boost,EGT,oil temp & pressure/aem AFR

12-26-2007, 10:10 PM	#2
86SupraMan 3" Exhaust Join Date: Sep 2007 Location: Vancouver B.C. Canada Posts: 58	Recommended u DONT buy it from him. 1.) engine looks pretty beat up, extras or no, are you sure it runs? do u want the problem of fixing it should it not run? 2.) i bought a 7MGE from ebay, totally screwed. paid 2600 for install + 800 for purchase just to find out engine was a piece. now im having my old bottem end machined and pretty much its gettin the full meal deal to get this puppy runnin. imo dont buy from ebay unless their gonna give u a wicked good return policy 3.) look at their buyers feedback, sure, he has 100%, but there are only 2 comments, and from the same guy.. i find a touch suspicious. __________________ 86.5 Toyota Supra ((Current Mods)) : -Slotted/Crossdrilled Rotors -K&N Filtercharger -H4 Projection light Conversion -Magnaflow Catback Exhaust -=Mods to do=- : -Rust Repair -Bodykit -Paintjob -Engine work -Suspension -Wheels -Intake (Semi-Done) -Exhaust

01-23-2008, 06:10 AM	#5
west_side_supra 12psi boost Join Date: Sep 2006 Location: Marysville Washington Posts: 353	its a good motor for spare parts, or to build from the ground up. thats all i was sayin, not build it from the parts you get from the bid __________________ 7MGTE - 500hp never dyno'd exhaust: 3inch pipes no cat/powerhouse manifold/garret gt47 18psi/HKS SS racing wastegate fidenza cam gears intake: PHR 4inch intake/K&N filter/3 inch intercooler/ pipeFMIC/greddy type R bov/ fuel: 550cc PTE/ walbro 255lp / Aeromotive adj pressure regulator transmission: Fidenza flywheel/ACT extreme kit electronics: map ecu 1 / HKS EVC 9 gauges:boost,EGT,oil temp & pressure/aem AFR

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Good engine builder in PacNW?	tsupranami	MKIII Supra	5	03-17-2009 04:37 AM
problem seperating engine from manual tranny	Gengus	MKIII Supra	7	01-29-2008 12:10 AM
What is a good way to clean out the engine bay?	D_Train	MKIII Supra	21	05-19-2007 07:11 PM
Is the 1JZGTE a good engine?	Legionnaire	MKIII Supra	7	03-16-2006 07:26 PM

01-20-2008, 05:42 PM	#3
89n/aA/T-2turbo5spd Stock Join Date: Jan 2006 Location: Tampa Posts: 27	Never buy an engine in pieces, people can/and will lie to make money.

01-23-2008, 05:08 AM	#4
89wna Stock Join Date: Jan 2008 Location: FL Posts: 5	U might as well get a motor thats already f*cked up . do it right the 1st time. buy a long block or good jdm.