really could use help - vacuum, race on the 26th

carl johansson · 12-24-2007, 03:23 AM

OK people,
I could really use your help and expertise here. we are racing to prep a supra to run in the 24 hours of Lemons on the 29th and 30th. The car needs to be on the track for practice and shakedown on the 28th - and we have to travel the 27th, so time is really tight. we went from dead on the road scrapper to fullly caged, rebuilt motor, gutted etc race car in less than 4 weeks, working on different parts of the car in 3 different states!
But the vacuum was so completely screwed up and parts missing - that we can't figure out a few of the vacuum lines. we don't want to just plug em all - as some would probably affect the computer - and that would be bad.

In particular, there are 2 what appear to be vacuum opperated switches that mount on the rear drivers side of the motor - at least thats what we think. Anyone have a photo or diagram of where it mounts - and what it hooks to?

Carl Johansson
Oh Yah, Merry Christmas, happy holidays to each and every one of you!

Pretaco · 12-24-2007, 03:40 AM

Check this out:

MK3 TSRM On-Line

Hope it helps
Ray.

carl johansson · 12-24-2007, 11:37 PM

Thanks , thats a great resource!
Merry Christmas

12-24-2007, 03:23 AM	#1
carl johansson 3" Exhaust Join Date: Nov 2007 Location: Auberry, California Posts: 141	really could use help - vacuum, race on the 26th OK people, I could really use your help and expertise here. we are racing to prep a supra to run in the 24 hours of Lemons on the 29th and 30th. The car needs to be on the track for practice and shakedown on the 28th - and we have to travel the 27th, so time is really tight. we went from dead on the road scrapper to fullly caged, rebuilt motor, gutted etc race car in less than 4 weeks, working on different parts of the car in 3 different states! But the vacuum was so completely screwed up and parts missing - that we can't figure out a few of the vacuum lines. we don't want to just plug em all - as some would probably affect the computer - and that would be bad. In particular, there are 2 what appear to be vacuum opperated switches that mount on the rear drivers side of the motor - at least thats what we think. Anyone have a photo or diagram of where it mounts - and what it hooks to? Carl Johansson Oh Yah, Merry Christmas, happy holidays to each and every one of you!

12-24-2007, 03:40 AM	#2
Pretaco 3" Exhaust Join Date: Dec 2007 Location: Glendale, AZ Posts: 126	Check this out: MK3 TSRM On-Line Hope it helps Ray. __________________ '88 Supra Targa 5 speed w/ '90 7M-GTE Currently Running Good For Sale: Light blue body parts, Blue interior parts all from '90 supra targa turbo manual. Also for sale: R154 trans, brake pedal, master cylinder, booster, abs actuator, sensors, abs ecu, driveshaft, 3.90 lsd rear end, radiator, wiring, speedo cable, 8 saw blade wheels, '88 ecu, relays, cruise control actuator (bad cable), empty fuel tank, etc....

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Max safe long straight performance in a road race?	Humba	MKIV Supra	7	12-25-2008 05:38 AM
The Beginning of Race Cars	davidbeau	Road Racing & Autocross	0	04-18-2008 05:45 AM
Help me win the race!	carl johansson	MKIII Supra	9	11-14-2007 04:28 AM
Newbee: Question About Vacuum lines..	Alejo_NIN	MKIII Supra	3	01-12-2006 07:18 AM
vacuum advance/retard	tonster	MKII Supra	0	09-16-2005 06:43 PM

12-24-2007, 11:37 PM	#3
carl johansson 3" Exhaust Join Date: Nov 2007 Location: Auberry, California Posts: 141	Thanks , thats a great resource! Merry Christmas