![]() |
clutch pedal sticks
my car currently does not run, its an 88 turbo. when i push the clutch in as to start it, it does not return to the up position. the clutch pedal just sticks to the floor. how should i go about fixing this? low fluid? some sort of spring problem?
|
I believe that happens when the master and slave cylinders lose all pressure, which means air in the line, you're out of brake fluid, a broken hose or some goose has loosened the bleeder valve. When was the last time you checked your brake fluid level?
|
brake fluid level is fine. but y wuld it be the brake fluid if its the clutch pedal not the brake pedal
|
He means clutch fluid level. Clutch master cylinder is near the brake master. It uses brake fluid also.
|
let someone bleed the clutchlines for you and see if it works back that should fix the problem if everything else is allright.
I had the same problem |
i'd bet your master cylinder is shot probably have a little stain down there on the carpet under the pedal too
|
Quote:
|
All times are GMT. The time now is 02:06 PM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.