ignition problem???

ratiugslinky · 04-25-2008, 12:35 AM

thanks guys

ratiugslinky · 04-25-2008, 12:36 AM

by the way it is a turbo. and it starts in the cold sometimes and the hot sometimes. i dont notice a pattern.

cre · 04-25-2008, 01:58 AM

Start with the CSI (cold start injector): MK3 TSRM On-Line

supramacist · 04-25-2008, 02:04 AM

That's what I was thinking as well but didn't want propagandize bull shite.

ratiugslinky · 04-25-2008, 07:23 AM

thanks but my engine is a 7mgte. that diagram is for a 7mge. does it matter?

cre · 04-25-2008, 02:33 PM

Take a look though the link I posted... it's got the info on both mixed throughout. Although, this circuit is the same from one to the next, just the locations of parts changes.

ddmcse · 04-25-2008, 03:56 PM

what is the condition of the wires connected to the cam position sensor ?

wires on 20+ year old supras get dried out and brittle

if you had a cold start injector issue it would still start but it wouldn't start on the first attempt maybe the second or third

it would be interesting to check if you are getting spark to the plugs when it won't start .

i had an issue like this and it was related to mangled wires going to the CPS

04-25-2008, 03:56 PM	#7
ddmcse 500whp yet? Join Date: Jun 2005 Location: CT U.S.A. Posts: 966	what is the condition of the wires connected to the cam position sensor ? wires on 20+ year old supras get dried out and brittle if you had a cold start injector issue it would still start but it wouldn't start on the first attempt maybe the second or third it would be interesting to check if you are getting spark to the plugs when it won't start . i had an issue like this and it was related to mangled wires going to the CPS __________________ 300+ RW HP Dyno run, jdm,mod turbo,3"exh,electfan,greddyboost Blown HeadGasket info My Supra KiXGaS

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
ABS Problem?	rasclaat_98	MKIII Supra	6	12-13-2010 09:53 PM
speed sensor problem	nadircicek	Non-Generation Specific Questions	8	10-09-2009 05:58 PM
Ignition Problem	Burning Pyro	MKIII Supra	9	04-24-2008 02:31 PM
Ignition write up..	midwestmk2	MKII Supra	0	06-11-2006 02:56 AM
found the problem	brs86supra	MKIII Supra	0	05-02-2006 03:42 PM

04-25-2008, 12:35 AM	#1
ratiugslinky Stock Join Date: Apr 2008 Location: hawaii Posts: 14 Blog Entries: 1	thanks guys

04-25-2008, 12:36 AM	#2
ratiugslinky Stock Join Date: Apr 2008 Location: hawaii Posts: 14 Blog Entries: 1	by the way it is a turbo. and it starts in the cold sometimes and the hot sometimes. i dont notice a pattern.

04-25-2008, 01:58 AM	#3
cre Toyota Racing Development Join Date: Apr 2007 Posts: 5,038	Start with the CSI (cold start injector): MK3 TSRM On-Line

04-25-2008, 02:04 AM	#4
supramacist 1000whp postwhore Join Date: Apr 2007 Location: Escape from the Prison Planet Posts: 1,356	That's what I was thinking as well but didn't want propagandize bull shite.

04-25-2008, 07:23 AM	#5
ratiugslinky Stock Join Date: Apr 2008 Location: hawaii Posts: 14 Blog Entries: 1	thanks but my engine is a 7mgte. that diagram is for a 7mge. does it matter?

04-25-2008, 02:33 PM	#6
cre Toyota Racing Development Join Date: Apr 2007 Posts: 5,038	Take a look though the link I posted... it's got the info on both mixed throughout. Although, this circuit is the same from one to the next, just the locations of parts changes.