At Full Engine Warm Up Engine Ildes Down And Sometimes Dies!!! - Page 2

3.0trd · 06-23-2008, 05:21 AM

I had a bad tps, but mine would idle high, I figure it could do the same the other way, it was about 100, but I have an N/A... might want to test it

RspecMKiii · 07-04-2008, 03:07 AM

So it turns out that IT was my tps that was bad on the supra....she runs sooo much better now. Now i gotta find out which part number is which on the eibachs to see if they are reversed. Thanks all for the info to help me out.

Chambers · 07-04-2008, 03:29 AM

Good to hear you got it going.

dupra87 · 11-05-2009, 01:56 AM

hello there i have a 87 that does the same thing. i put a vent on it and then it started doing it real bad so i adjusted it all the way down and it's better but still does it sometimes . sooo annoying.

06-23-2008, 05:21 AM	#11
3.0trd 3" Exhaust Join Date: Mar 2008 Location: Cali Posts: 76	I had a bad tps, but mine would idle high, I figure it could do the same the other way, it was about 100, but I have an N/A... might want to test it __________________ Cometic MHG, ARP studs, H&R lowering springs

07-04-2008, 03:29 AM	#13
Chambers walbro fp Join Date: May 2007 Location: USA - Harford County, Maryland Posts: 481	Good to hear you got it going. __________________ Whats in the garage, well.... in the yard. 1986.5 Toyota Supra - NA - 5 spd 1986 Ford Ranger Lowrider - 5 spd 1984 Ford Ranger XLT - 7" Lift - 4X4 - Auto "Stuck in the 80's"

11-05-2009, 01:56 AM	#14
dupra87 Intake Join Date: Sep 2009 Location: fl Posts: 35	idle hello there i have a 87 that does the same thing. i put a vent on it and then it started doing it real bad so i adjusted it all the way down and it's better but still does it sometimes . sooo annoying. Last edited by dupra87; 11-05-2009 at 06:41 AM.

07-04-2008, 03:07 AM	#12
RspecMKiii Stock Join Date: Mar 2008 Location: San Diego Posts: 10	So it turns out that IT was my tps that was bad on the supra....she runs sooo much better now. Now i gotta find out which part number is which on the eibachs to see if they are reversed. Thanks all for the info to help me out.