CT26 for sale!

robertsws · 07-02-2008, 01:18 AM

I now need a new AFM due to it getting wet, so i'm going to upgrade to a Lexas AFM and just get my ugraded turbo re-balanced now as apposed to waiting till i have more money. That means that i now have a stock ct26 in good condition (trust me I wouldn't have just put it on my supra if it wasn't) for sale.

I did inspect and clean it, (it needed it thanks to sand and styrofoam peanuts). That includes taking it apart and replacing an o-ring and gasket for the coolant line. You can still see the white paint marks i made to ensure that it was aligned exactly the way it was before taking it apart. I made two marks on each side and aligned them all as i tightened it down. I put it on my supra and it pulls strong. I would keep it but since i am upgrading my AFM and having my upgraded turbo fixed, I just don't need it.
__________________

paulmicin · 07-02-2008, 04:13 AM

How much, shipped to 90650?

89yotasupra03 · 07-02-2008, 04:49 PM

i am very interested in the turbo, whats the price?

supramacist · 07-02-2008, 09:17 PM

What he said and a pic please.

$$$$$$??????

robertsws · 07-02-2008, 11:50 PM

i paid $140 for it, then put additional manhours into it. I'd like to get $150 for it plus $30 for shipping. other than that I don't mind keeping it just in case.

i will take pics, but the turbo is on the car and i'm not taking it off until this weekend. so then i guess saturday night i can have full pics up.

robertsws · 07-08-2008, 03:06 PM

here are the pics finally, if you look closely you can see the white marks on the compressor wheel and nut used for alignment. i didn't want to take the housing off but if i did then you could see the additional marks used for alignment. as i said earlier it pulls strong the only reason i'm getting ird of it is that i have an upgraded rebuilt turbo i'm getting rebalanced.

Corpral_Cali · 07-21-2008, 07:48 PM

hey we talked the other day,i'm the veteran from ny. hit me up

robertsws · 07-21-2008, 07:52 PM

the turbo is sold guys, thanks

07-02-2008, 01:18 AM	#1
robertsws 3" Exhaust Join Date: May 2008 Location: Gaithersburg, Maryland Posts: 63	CT26 for sale! I now need a new AFM due to it getting wet, so i'm going to upgrade to a Lexas AFM and just get my ugraded turbo re-balanced now as apposed to waiting till i have more money. That means that i now have a stock ct26 in good condition (trust me I wouldn't have just put it on my supra if it wasn't) for sale. I did inspect and clean it, (it needed it thanks to sand and styrofoam peanuts). That includes taking it apart and replacing an o-ring and gasket for the coolant line. You can still see the white paint marks i made to ensure that it was aligned exactly the way it was before taking it apart. I made two marks on each side and aligned them all as i tightened it down. I put it on my supra and it pulls strong. I would keep it but since i am upgrading my AFM and having my upgraded turbo fixed, I just don't need it. __________________ __________________ 1991 Supra - Turbo - 5spd 60-1 upgraded turbo Lexus AFM 3" exhaust, 4" tip SAFC 2 550cc injectors (2 sets, venom direct fit, RC engineering) 2.5" intercooler and piping Aluminum radiator w/dual electric fans ARP bolts w/MHG Full-auto turbo timer Fidanza Flywheel & Stage 2 Clutch spark plugs and wires. power steering pump cold temp start switch engine top end rebuilt transmission opened up and inspected at a tranny shop when the flywheel and clutch installed last week.

07-02-2008, 04:13 AM	#2
paulmicin 3" Exhaust Join Date: Oct 2007 Location: Norwalk, Ca Posts: 52	How much, shipped to 90650? __________________ 1989 5 speed turbo Koyo radiator Spearco intercooler HKS bov Greddy e-01 boost controller 245's all around Slotted + drilled all around 3" straight piping turbo-back, 4" tip Lowering springs HKS mushroom air filter

07-02-2008, 11:50 PM	#5
robertsws 3" Exhaust Join Date: May 2008 Location: Gaithersburg, Maryland Posts: 63	i paid $140 for it, then put additional manhours into it. I'd like to get $150 for it plus $30 for shipping. other than that I don't mind keeping it just in case. i will take pics, but the turbo is on the car and i'm not taking it off until this weekend. so then i guess saturday night i can have full pics up. __________________ 1991 Supra - Turbo - 5spd 60-1 upgraded turbo Lexus AFM 3" exhaust, 4" tip SAFC 2 550cc injectors (2 sets, venom direct fit, RC engineering) 2.5" intercooler and piping Aluminum radiator w/dual electric fans ARP bolts w/MHG Full-auto turbo timer Fidanza Flywheel & Stage 2 Clutch spark plugs and wires. power steering pump cold temp start switch engine top end rebuilt transmission opened up and inspected at a tranny shop when the flywheel and clutch installed last week. Last edited by robertsws; 07-02-2008 at 11:57 PM.

07-08-2008, 03:06 PM	#6
robertsws 3" Exhaust Join Date: May 2008 Location: Gaithersburg, Maryland Posts: 63	here are the pics finally, if you look closely you can see the white marks on the compressor wheel and nut used for alignment. i didn't want to take the housing off but if i did then you could see the additional marks used for alignment. as i said earlier it pulls strong the only reason i'm getting ird of it is that i have an upgraded rebuilt turbo i'm getting rebalanced. Attached Thumbnails __________________ 1991 Supra - Turbo - 5spd 60-1 upgraded turbo Lexus AFM 3" exhaust, 4" tip SAFC 2 550cc injectors (2 sets, venom direct fit, RC engineering) 2.5" intercooler and piping Aluminum radiator w/dual electric fans ARP bolts w/MHG Full-auto turbo timer Fidanza Flywheel & Stage 2 Clutch spark plugs and wires. power steering pump cold temp start switch engine top end rebuilt transmission opened up and inspected at a tranny shop when the flywheel and clutch installed last week.

07-21-2008, 07:52 PM	#8
robertsws 3" Exhaust Join Date: May 2008 Location: Gaithersburg, Maryland Posts: 63	the turbo is sold guys, thanks __________________ 1991 Supra - Turbo - 5spd 60-1 upgraded turbo Lexus AFM 3" exhaust, 4" tip SAFC 2 550cc injectors (2 sets, venom direct fit, RC engineering) 2.5" intercooler and piping Aluminum radiator w/dual electric fans ARP bolts w/MHG Full-auto turbo timer Fidanza Flywheel & Stage 2 Clutch spark plugs and wires. power steering pump cold temp start switch engine top end rebuilt transmission opened up and inspected at a tranny shop when the flywheel and clutch installed last week.

07-02-2008, 04:49 PM	#3
89yotasupra03 Stock Join Date: Jun 2008 Location: new york Posts: 8	i am very interested in the turbo, whats the price?

07-02-2008, 09:17 PM	#4
supramacist 1000whp postwhore Join Date: Apr 2007 Location: Escape from the Prison Planet Posts: 1,356	What he said and a pic please. $$$$$$??????

07-21-2008, 07:48 PM	#7
Corpral_Cali Stock Join Date: Jun 2008 Location: ny Posts: 13	hey we talked the other day,i'm the veteran from ny. hit me up

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
rebuild ct26	paulmicin	MKIII Supra	7	08-03-2008 09:49 PM
ct26 upgraded to 60 trim.. Good or bad?	fexterz11	Non-Generation Specific Questions	5	03-20-2008 04:26 AM
boost on stock with ct26?	carlosemagana	MKIII Supra	8	12-31-2006 07:48 AM
twin ct26, wut u think	j3pz	MKIII Supra	3	04-03-2006 04:50 PM