Auto Tranny oil cooler
 

Here in next couple months im replacing the stock radiator with the HASTE aluminum rad and i will need to add a transmission cooler

Already decided on the B&M 130-70266 its 11x8x1.5 and i am wondering if i will need a inline thermostat for it or not. Want to do this right the first time and not have to worry about it again.

Also what are the temps of the tranny fluid as far as a good/bad range?

Also what do i need to attach a 6an hose to the transmission ?

Oil Cooler & Tube (ATM)

Those are the stock oil cooler lines shown on there. Looks like its threaded into the transmisison although hard to tell. Would anyone happen to kno the thread size so i can buy an adapter to AN type fittings?

Anyways decided to go with the Perma-cool retmote thermostat, 20 ft of Aeroquip stainless braided hose, Aeroquip hose fastners and a B&M tranny cooler only about 300$ in total.

climped underneath my car and from the looks of it its a 12mm thread, Wont be sure till i take it off but dont want to do that untill i have to parts in lol... So i went ahead and orderd the 12mm to -6an adapter ill let you guys know how it works out