Got A Code 52
 

I Checked For Codes And Got A Code 52 Knocksensor I Checked They Look Good So I Checked The Wire On The Sensor And It Goes Up By The Throttle Body But They Are Cut Right There Thats Where They Stop So I Wanted To Know Were Do They Go Any Help Will Be Nice Thanx

It should continue all the way the the ECM. You'll need to check all the wiring associated with the ECM o the engine to find the other end. The wire colors should match up.

If you unplug the ecu you will see there is two transparent wires in the connectors these are the ones that should go to the knock sensors. You can rewire from there to your engine bay, and use shielded cable which you ground on ONE end.