![]() |
90 mkIII starter connections
Okay guys, this is a little embarrassing. I started rebuilding my motor about 2 years ago. I am finally putting it all back together. My question is on the starter connections, i have 2 wires coming from the wiring harness that i remember going to the starter. One is the plastic connector that goes to the spade connecion, the other one is a spade connector that i believe goes to the stud on the starter, and then of course the positive cable from the battery to the stud on the starter. Im just not sure i remember having two connectors to the stud on the starter. If anyone could verify this for me i would be really grateful.
Thanks for any replies, Doodah Thankyou for any replies. Doodah |
Only two connections to the starter, one large one that bolts on (main power to motor), and one small spade connector that drives the solenoid via the ignition (Both positive) Neutral comes through the motor being bolted to the bell housing.
|
All times are GMT. The time now is 06:57 AM. |
Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2025, vBulletin Solutions, Inc.