90 mkIII starter connections

doodah · 11-11-2008, 05:12 PM

Okay guys, this is a little embarrassing. I started rebuilding my motor about 2 years ago. I am finally putting it all back together. My question is on the starter connections, i have 2 wires coming from the wiring harness that i remember going to the starter. One is the plastic connector that goes to the spade connecion, the other one is a spade connector that i believe goes to the stud on the starter, and then of course the positive cable from the battery to the stud on the starter. Im just not sure i remember having two connectors to the stud on the starter. If anyone could verify this for me i would be really grateful.

Thanks for any replies,

Doodah

Thankyou for any replies.

Doodah

Bill UK · 11-11-2008, 06:14 PM

Only two connections to the starter, one large one that bolts on (main power to motor), and one small spade connector that drives the solenoid via the ignition (Both positive) Neutral comes through the motor being bolted to the bell housing.

11-11-2008, 05:12 PM	#1
doodah Stock Join Date: Feb 2005 Posts: 10	90 mkIII starter connections Okay guys, this is a little embarrassing. I started rebuilding my motor about 2 years ago. I am finally putting it all back together. My question is on the starter connections, i have 2 wires coming from the wiring harness that i remember going to the starter. One is the plastic connector that goes to the spade connecion, the other one is a spade connector that i believe goes to the stud on the starter, and then of course the positive cable from the battery to the stud on the starter. Im just not sure i remember having two connectors to the stud on the starter. If anyone could verify this for me i would be really grateful. Thanks for any replies, Doodah Thankyou for any replies. Doodah

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Starter Removal question	OkieRA29	MKIII Supra	13	05-11-2010 12:08 AM
CLOSED WTB - USA-Usable RHD MkIII	GTRacer	Buy/Sell Cars	5	12-02-2009 02:21 AM
How to quickly test starter	CyFi6	MKIII Supra	4	11-30-2007 01:57 AM
starter removel?	swied	MKIII Supra	4	04-23-2007 04:50 AM

11-11-2008, 06:14 PM	#2
Bill UK AEM EMS Join Date: Jul 2006 Location: UK Posts: 891	Only two connections to the starter, one large one that bolts on (main power to motor), and one small spade connector that drives the solenoid via the ignition (Both positive) Neutral comes through the motor being bolted to the bell housing.