11-13-2004, 01:22 PM | #1 |
Stock
Join Date: Nov 2004
Posts: 1
|
[B][B]hey. i was wondering how much can i boost when all i have is a intake and exhaust?? what is the safe range..? can a mkiii take a gsr? cause i lost to one by a fender and figure if i boost my turbo just a little i might take him...?? anyone knows any quick mods? thanks
|
11-14-2004, 01:15 AM | #2 |
3" Exhaust
Join Date: Nov 2004
Posts: 81
|
depends on what your mk3 is. 1g-gte's can take a few extra psi easy, most mk3's can comfortably run up to just below 1 bar boost without stressing much at all. most you'll have to get a fuel cut defender, as boost cut varies, but is mostly about 11-13psi depending on car and weather, etc. as for the gsr's, they're easy for a 7m mk3. raced a evo 6.5 on the open road and gave him one hell of a shock. off the line would be different due to weight, power delivery, etc, but above 50k, they're easy.
|
11-14-2004, 04:24 AM | #3 |
Guest
Posts: n/a
|
[B]it has a 7mgte in it ...i heard it was suppost to boost 6.5 stock but when i mash on it the boost gauge stop at 4 ..does that mean im boosting 4 psi?
|
11-14-2004, 08:32 AM | #4 | |
7M POWAH! ;)
Join Date: Jun 2004
Location: New Zealand
Posts: 2,312
|
Quote:
are you auto or manual... autos generally boost less than a manual... also 4 on the stock gauge is not measuring in psi... it's inhg or something lol are you looking at the stock gauge or have you got an aftermarket one? if it's aftermarket and reading psi it should say on there what measurement... if it is stopping at 4 and it reads psi then yes many things can cause low boost let me know this bit and i'll continue
__________________
Please use the forum to ask your questions as they will get replied to much faster than pming me Pics of my build. "Good girls are just bad girls that don't get caught" Do a diagnostic first! |
|
11-15-2004, 12:03 AM | #5 |
Guest
Posts: n/a
|
it is a manual ... and it is the stock gauge... :P so 7mgte can't or can take a gsr stock..?? first time i took him by a car but the second time he took me by a fender..all i wanted is to smoke him cause it is the type that talk smack...haha.. i think he mess up the first or did i messup the second i don't know...i figure i can take him by alot cause i have a low mileage car...i have aa 30k mile jdm 7mgte in it..do you guys know what ill hit stock in a 1/4 mile? or what do i need to be hitting 13's in a 1/4 mile that is how fast i want to go...but was wondering what i need to put in there....thanks alot sorry for dumb question but im new to toyota..i usally race with honda and acura... B)
|
11-15-2004, 12:18 AM | #6 |
7M POWAH! ;)
Join Date: Jun 2004
Location: New Zealand
Posts: 2,312
|
congrats on upgrading to a great car hehe
ok stock gauge doesn't read in psi... i would say you are boostin rather well... the first thing i would do tho is buy an aftermarket boost gauge so you know what you are boosting no i don't think you will take a gsr stock.. we do 15.3 average on the strip bog standard according to reviews just get a boost gauge and a manual boost controller and wack her up to 10psi and see how you get on i'm doing 13.5's on the 1/4 with..... trust airnx filter 3" exhaust from turbo elbow back 550x300x75 intercooler 2 1/2 intercooler hardpipes to4e ct26 turbo (upgraded compressor wheel) manual boost controller (used only to get on boost faster... not actually turned up) i run 9psi stock with my setup exhaust side of the head port matched to the gasket hks fuel cut defender (type k is needed for the 7mgte) and questions are never dumb thats how you advance and learn not to blow up your engine
__________________
Please use the forum to ask your questions as they will get replied to much faster than pming me Pics of my build. "Good girls are just bad girls that don't get caught" Do a diagnostic first! |
11-15-2004, 02:42 AM | #7 |
Guest
Posts: n/a
|
i just bought a garrett turbo_compressor a/r 1.10, exhaust housing a/r.84, compressor inlet 3", outlet 2 3/4 ..exhaust inlet 3 5/8" outlet 4 1/4 ..and have a custom intercooler,550cc injector not in the car yet...when i put that on how much can i boost and how close am i to be hitting 13's like you...or what will i hit in a 1/4 mile ? oh and what is good for a turbo i6 7m..3" pipe or a 2 1/2 pipe.(downpipe)..cause some people say to big is no good ...but some said for turbo car the bigger the better...and one more thing do i need that fuel cut defenser..and what up with the lexus afm do i really need that ????tlhank...hahah i want revenge on that gsr...hahaha
|
11-20-2004, 08:43 AM | #8 |
7M POWAH! ;)
Join Date: Jun 2004
Location: New Zealand
Posts: 2,312
|
well with that setup you should be able to run 15psi safely on a stock engine and not blow anything up... just make sure you have the fuel to supply it.. 3" downpipe should be good for now... bigger downpipe you go less torque but more flow so therefore more power at the end of the day
if you spent all that money on the upgrades i would spend the extra and get an aftermarket ecu... if that can't happen get an safc and a hks type k fuel cut defender and make sure she's tuned.... fuel is really really important.. more so than really anything else... the lexus afm is a trick just like the fcd for the ecu... it sucks in 25% of unmetered air which is why you then need 550cc injectors to counter as they are 25% larger so they match... fuel cut is raised to about 20psi i think... if you can tune it all correctly you should be in the 12's you'll nail that gsr hehe
__________________
Please use the forum to ask your questions as they will get replied to much faster than pming me Pics of my build. "Good girls are just bad girls that don't get caught" Do a diagnostic first! |
11-30-2004, 09:46 AM | #9 |
3" Exhaust
Join Date: Sep 2004
Location: Brisbane, QLD, Australia
Posts: 82
|
ahhh..yeah nice car mate..it measures in mm of Hg, which is mm of Murcury...i am trying to find the conversion factor from mmHg to BAR...i think that it is around 620mm of Hg to 1.0 bar = ~14.3psi
__________________
MA70 widebody-1jz conversion with R154, HKS Type S intercooler, Tein HA coilovers, Apexi PowerFC, HKS step one Cams painted in AudiTT Blue |
12-20-2004, 10:16 PM | #10 |
Guest
Posts: n/a
|
I am new to the turbo crowd .And I just wanted to know can I get more boost out of my stock turbo on my 91 Supra with a manual boost controller. Thanks
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
low boost psi, wtf | supradad86_5 | MKIII Supra | 4 | 02-09-2014 02:05 AM |
wont hold boost | Supraman | MKIII Supra | 12 | 04-19-2007 04:52 AM |
issue w/ boost spikes? i think? | NOTORIOUS VR | Non-Generation Specific Questions | 17 | 01-17-2007 08:35 PM |
installing manual boost controller 1989?? | hamburgler | MKIII Supra | 4 | 07-13-2005 12:55 PM |
No boost in neutral but boost in gear! | edgardo | MKIII Supra | 5 | 10-09-2004 04:01 AM |